修车大队一品楼qm论坛51一品茶楼论坛,栖凤楼品茶全国楼凤app软件 ,栖凤阁全国论坛入口,广州百花丛bhc论坛杭州百花坊妃子阁

Phototransferred thermoluminescence of annealed synthetic quartz: Analysis of illumination-time profiles, kinetics and competition effects

DOI:10.1016/j.radmeas.2019.106236 期刊:Radiation Measurements 出版年份:2019 更新时间:2025-09-12 10:27:22
摘要: Phototransferred thermoluminescence (PTTL) induced from annealed synthetic quartz using 470 nm blue light is reported. The quartz was annealed at 900oC for 10, 30 and 60 minutes prior to use. A glow curve of conventional TL measured at 1oC s-1 following irradiation to 200 Gy for the sample annealed for 10 minutes shows six peaks at 90, 122, 176, 210, 240 and 340oC. The sample annealed for 30 minutes has peaks at 80, 110, 136, 196, 240 and 330oC. Similarly, the sample annealed for 60 minutes also has six peaks at 80, 120, 134, 188, 235 and 340oC. For ease of reference, these are labelled I-VI respectively. Peaks observed under PTTL are referred to as A1 onwards. Of the six peaks, only the first three are reproduced under phototransfer for the sample annealed for 60 minutes. When the duration of annealing was reduced to 10 minutes, PTTL is induced only at peaks A1 and A3. Interestingly, for the intermediate duration of annealing of 30 minutes, the only peak that appears under phototransfer is the first one, A1. For quartz annealed for 10 minutes, the PTTL appears as long as the preheating temperature does not exceed 560oC. On the other hand, in the quartz annealed for 30 and 60 minutes, PTTL only appears for preheating to and below 450oC. This shows that the occupancy of deep electron traps at temperatures beyond 450 or 560oC is low in the said samples. The activation energy for peaks A1 and A3 was found to be about 0.68 eV. The PTTL peaks were studied for thermal quenching and peaks A1 and A3 were determined to be subject to this effect. The activation energy for thermal quenching was determined as 0.62 ± 0.04 eV in analysis using peak A1. In all cases, the PTTL intensity goes through a peak as a function of illumination time. The experimental dependence of PTTL intensity on illumination time is modelled using sets of coupled linear differential equations based on systems of donors and acceptors whose number is determined by preheating temperature. Competition effects involved in the PTTL have been discussed.
作者: M.L. Chithambo,R.R. Dawam
AI智能分析
纠错
研究概述 实验方案 设备清单

The aim of this work is to study PTTL from synthetic quartz annealed at 900oC.

Phototransferred thermoluminescence of annealed synthetic quartz induced using 470 nm blue light has been studied. Samples were annealed at 900oC for 10, 30 and 60 minutes. The glow curve measured at 1oC s-1 after irradiation to 200 Gy shows six peaks for all samples. However, only three PTTL peaks were reproduced for the sample annealed for 60 minutes. When the duration of annealing was reduced to 10 minutes, only two PTTL peaks were induced. For an intermediate duration of 30 minutes only one PTTL peak was reproduced. Deep traps beyond 600oC make a negligible contribution to the PTTL. All the PTTL peaks studied are affected by thermal quenching. The activation energy of thermal quenching for peaks A1 and A3 were evaluated as 0.62 ± 0.02 eV and 0.65 ± 0.02 eV respectively. The PTTL intensity goes through a peak as a function of illumination time. The change is modelled using sets of coupled linear differential equations based on systems of donors and acceptors whose number is determined by preheating temperature. Competition effects involved in the PTTL have been reported and modelled using an empirical model.

The signal in the samples annealed for 30 and 60 minutes was too low for reliable analysis. Deep traps beyond 600oC make a negligible contribution to the PTTL.

SCI高频之选
查看全部>
  • AQ6370D
    AQ6370D
    463

    型号:AQ6370D

    厂家:Yokogawa

    智能分析: Yokogawa AQ6370D是一款性能卓越的光谱分析仪,适用于光通信领域以及光放大器(EDFA)的测量和评估。其高波长分辨率、精准度和宽动态范围使其成为实验室和工业环境中的理想选择。虽然设备体积较大且预热时间较长,但其丰富的接口和出色的显示屏设计弥补了这些不足,整体是一款值得推荐的光谱分析仪。
    获取实验方案
  • ZEISS EVO Family

    型号:ZEISS EVO Family

    厂家:Carl Zeiss Microscopy GmbH

    智能分析: ZEISS EVO系列是一款高性能??榛璧缱酉晕⒕担视糜诓牧峡蒲?、生命科学及工业质量控制等领域。其先进的技术特性包括高分辨率、广泛加速电压范围和集成EDS系统。该产品操作直观,支持多用户环境,适合科学研究和工业应用。然而,价格信息缺失以及潜在的维护成本可能是其需要注意的方面。总体而言,ZEISS EVO系列表现优秀,值得推荐给专业用户。
    获取实验方案
  • Crossbeam Family

    型号:Crossbeam Family350/550

    厂家:Carl Zeiss Microscopy GmbH

    智能分析: ZEISS Crossbeam系列是蔡司公司推出的一款高端光电分析设备,结合了场发射扫描电子显微镜(FE-SEM)和聚焦离子束(FIB)的功能,适用于材料科学、纳米技术和半导体行业等多个领域。其高分辨率成像能力和自动化样品制备功能使其成为高通量分析的理想选择。此外,该设备支持多种检测器,具备强大的多功能性,是高精度研究和工业应用的利器。然而,由于其高端定位,设备成本较高且操作需要专业技能。总体而言,该设备表现卓越,为科学研究和工业应用提供了先进的解决方案。
    获取实验方案
  • Axio Observer

    型号:Axio Observer

    厂家:Carl Zeiss Microscopy GmbH

    智能分析: Axio Observer是一款专为金相学研究设计的倒置显微镜系统,以其高效的设计和蔡司知名的光学技术为特色。它能够快速、灵活地分析大量样品,并支持自动化操作,适用于多种应用场景,包括晶粒尺寸分析、非金属夹杂物检测等。然而,其重量较大且光源寿命较短,可能对使用者提出了额外的维护和空间管理需求。总体而言,这款产品在性能和可靠性方面表现出色,特别适合专业实验室使用。
    获取实验方案
  • ZEISS LSM 990 Spectral Multiplex

    型号:ZEISS LSM 990 Spectral Multiplex

    厂家:Carl Zeiss Microscopy GmbH

    智能分析: ZEISS LSM 990 Spectral Multiplex是一款定位于高端科研机构的光谱成像系统,具有卓越的光谱分辨率和自动化功能,适用于复杂的生物、医学及材料科学实验。其高效的荧光标签分离能力和多功能自动化设计为用户提供了强大的实验支持。然而,高昂的价格和一定的学习曲线可能对中小型实验室构成挑战。总体而言,这是一款性能优越、适应性强的高端实验设备。
    获取实验方案
  • ZEISS Sigma 300 with RISE

    型号:ZEISS Sigma 300 with RISE

    厂家:Carl Zeiss Microscopy GmbH

    智能分析: ZEISS Sigma 300 with RISE是蔡司公司推出的一款高端光谱分析仪,集成了拉曼成像和扫描电子显微镜技术,能够提供高质量的化学和结构分析。其功能强大,支持多领域应用,但设备价格较高且操作学习曲线可能较陡。适用于科研机构和高端实验室,是材料科学和生命科学领域的理想选择。
    获取实验方案
立即咨询

加载中....

论文纠错

您正在对论文“Phototransferred thermoluminescence of annealed synthetic quartz: Analysis of illumination-time profiles, kinetics and competition effects”进行纠错

纠错内容

联系方式(选填)

设备询价

称呼

电话

+86

单位名称

用途

期望交货周期

产品预约

称呼

电话

+86

单位名称

用途

期望交货周期