研究目的
Investigating the performance of copper-indium-gallium-diselenide (CIGS) solar cell by optimizing doping concentration, thickness, and energy band gap to achieve higher efficiency.
研究成果
By optimizing the architecture of the CIGS solar cell, excellent performance was achieved with a short circuit current density (Jsc) of 39.89910 mA/cm2, an open circuit voltage (VOC) of 0.91901 V, a fill factor (FF) of 86.67040%, and an efficiency of 31.78%. This efficiency is much higher than the values for similar CIGS solar cells reported so far.
研究不足
The study is based on simulation results using the TCAD Silvaco simulator, which may not fully capture all real-world conditions and material behaviors. The optimization is specific to the proposed structure and may not be directly applicable to other configurations.
1：Experimental Design and Method Selection:
The study was performed using the TCAD Silvaco simulator to model the electrical behavior of the CIGS solar cell. The effects of grading the band gap of the CIGS absorber layer, various thicknesses, and doping concentrations of different layers were investigated.
2：Sample Selection and Data Sources:
The proposed structure contains Molybdenum (Mo) metal as the first layer, InGaP as a reflector, two layers of CIGS with different band gaps as light absorbers, n-type ZnSe thin film buffer, and ZnO transparent conductor film as the window layer.
3：List of Experimental Equipment and Materials:
TCAD Silvaco simulator was used for the simulation. The materials used include ZnO, ZnSe, CIGS, InGaP, and Mo.
4：Experimental Procedures and Operational Workflow:
The structure was studied under a 1.5 AM solar cell with P = 1000 Wm?2 illumination at room temperature (T = 300 K). The effects of changing the thickness and doping concentration of each layer on the efficiency were investigated.
5：5 AM solar cell with P = 1000 Wm?2 illumination at room temperature (T = 300 K). The effects of changing the thickness and doping concentration of each layer on the efficiency were investigated.
Data Analysis Methods:
5. Data Analysis Methods: The performance of the solar cell was evaluated based on open circuit voltage, short circuit current density, fill factor, and efficiency.
独家科研数据包，助您复现前沿成果，加速创新突破
获取完整内容
