摘要： We report a series of new n-type random copolymers (P(NDI2OD-Se-Th x) where x = 0, 0.5, 0.7, 0.8, 0.9, 1.0) consisting of naphthalene diimide (NDI), selenophene-2,2’-thiophene (Se-Th), and seleno[3,2-b]thiophene (SeTh) to demonstrate their use in producing efficient all-polymer solar cells (all-PSCs) and organic field-effect transistors (OFETs). To investigate the effect of polymer crystallinity on the performance of all-PSCs and OFETs, we tuned the composition of the Se-Th and SeTh moieties in the P(NDI2OD-Se-Th x) polymers, resulting in enhanced crystalline properties with higher Se-Th ratio. Thus, the OFET electron mobility was increased with higher Se-Th ratio, exhibiting the highest value of 1.38×10?1 cm2 V?1 s?1 with P(NDI2OD-Se-Th 1.0). However, the performance of all-PSCs based on PBDB-T:P(NDI2OD-Se-Th x) showed a non-linear trend relative to the Se-Th ratio and the performance was optimized with P(NDI2OD-Se-Th 0.8) exhibiting the highest power coversion efficiency of 8.30%. This is attributed to the stronger crystallization-driven phase separation in all-polymer blends for higher Se-Th ratio. At the optimal crystallinity of P(NDI2OD-Se-Th 0.8) in all-PSCs, the degree of phase separation, domain purity and the electron mobility were optimized, resulting in enhanced charge generation and transport. Our works describe structure-property-performance relationships to design effective n-type polymers in terms of crystalline and electrical properties suitable for both efficient OFETs and all-PSCs.