摘要： We report growth of single-crystal Cd0.9Zn0.1Te ingots while using the pressure-controlled Bridgman method. The Cd pressure was controlled during growth to suppress its evaporation from the melt and reduce the size of Te inclusions in the as-grown crystals. The accelerated crucible rotation technique (ACRT) was used to suppress constitutional supercooling. The fast accelerating and slow decelerating rotation speeds were optimized. Two-inch Cd0.9Zn0.1Te single-crystal ingots without grain boundaries or twins were grown reproducibly. Glow discharge mass spectrometry results indicate the e?ective segregation coe?cients of Zn and In dopants are 1.24 and 0.18, respectively. The full width half maximum (FWHM) of X-ray rocking curve was approximately 22.5 ”, and the IR transmittance was approximately 61%, indicating high crystallinity. The mean size of the Te inclusions was approximately 13.4 μm. Single-crystal wafers were cut into 5 × 5 × 2 mm3 slices and then used to fabricate gamma ray detectors. The energy resolution and peak-to-valley ratio maps were constructed while using 59.5 keV gamma ray measurements, which proved the high uniformity of detection performance.