研究目的
Investigating the photoconductive behavior and photovoltaic effects in phase change materials (PCMs) for optoelectronics applications.
研究成果
The study reveals strong photoconductive and photovoltaic effects in PCMs, with the amorphous state being more photoactive than the crystalline state. Device engineering can tune the contribution of photothermal and photoconductive effects. The findings advance the understanding of PCMs' photo-physics and their potential in optoelectronics.
研究不足
The study is limited by the device geometry and material properties, such as the thermal conductivity of electrodes affecting photothermal effects. The photodetection bandwidths are lower than commercial photodiodes, and the dynamic range for photo-detection is limited by saturation at high irradiance.
1:Experimental Design and Method Selection:
The study involves nanoscale crossbar devices made of ITO/GST/ITO/Pt layers to investigate photoconductivity and photovoltaic effects in PCMs under various illumination conditions.
2:Sample Selection and Data Sources:
Devices were fabricated with sputter-deposited thin films of ITO and GST, with the active photo-sensitive layer being GST.
3:List of Experimental Equipment and Materials:
A Keithely 2614 B sourcemeter, Tektronix AFG000C pulse generator, and Teledyne Lecroy WaveSurfer Oscilloscope were used for electrical measurements. A custom-built probestation with a Gaussian beam spot size of 20 um for 637 nm laser was used for illumination.
4:Experimental Procedures and Operational Workflow:
Devices were illuminated under varying intensities of light, and electrical responses were recorded. The phase state of GST was altered electrically and thermally to study its effect on photoconductivity.
5:Data Analysis Methods:
The photocurrent, photo-responsivity, and internal quantum efficiency were calculated from the measured data. Optical properties were analyzed using transfer matrix methods.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容