研究目的
Investigating the intensification of degradation and mineralization of methyl orange azo dye in contaminated water with simultaneous renewable energy production using sequential anaerobic and electro-Fenton processes mediated by W and Mo oxides in photo-assisted microbial fuel cells.
研究成果
The sequential anaerobic and electro-Fenton processes in photo-assisted MFCs with W and Mo oxides effectively degraded and mineralized methyl orange azo dye with high efficiency (96.8% mineralization) and simultaneous electricity generation. This approach leverages synergistic effects of catalytic species, light irradiation, and operational shifts, offering a sustainable method for wastewater treatment and renewable energy production. Future work should focus on optimizing conditions for broader applicability and enhancing energy output.
研究不足
The study is limited to methyl orange azo dye and may not generalize to other contaminants. Performance decreases at higher pH due to metal leaching from cathodes. The scale is laboratory-based, and practical application in real wastewater may face challenges like varying water compositions and scalability issues. Energy production is low (0.0002 kWh/kg MO), which might not be economically viable without optimization.
1:Experimental Design and Method Selection:
The study used photo-assisted two-chamber microbial fuel cells (MFCs) with sequential anaerobic and aerobic operations. W and Mo oxides were deposited on graphite felt cathodes to enhance electron transfer and catalytic activity. The process involved reductive decolorization under anaerobic conditions and oxidative mineralization under aerobic conditions with Fe(III) addition for electro-Fenton reactions.
2:Sample Selection and Data Sources:
Methyl orange (MO) azo dye at 20 mg/L concentration was used as the model contaminant. Catholyte and anolyte solutions were prepared with specific buffers and nutrients.
3:List of Experimental Equipment and Materials:
MFC reactors made of polymethyl methacrylate, cation exchange membrane (CMI-7000), graphite felt electrodes, saturated calomel reference electrode (SCE), 100 W iodine tungsten lamp for visible light irradiation, potentiostat (BioLogic VSP) for electrochemical measurements, UV-5500 PC spectrophotometer for MO concentration measurement, GC/MS (Agilent C5975C) for intermediate analysis, SEM (QUANTA450) with EDS for morphology, XRD (XRD-6000) for crystal structure. Chemicals included Na2WO4·2H2O, Na2MoO4·2H2O, Fe(III), scavengers like ammonium oxalate, isopropanol, benzoquinone.
4:Experimental Procedures and Operational Workflow:
Anodes were inoculated and acclimated with effluent from acetate-fed MFCs. Cathodes were prepared by depositing W and Mo oxides, calcined at 450°C. MFCs were operated under anaerobic (N2 sparging) or aerobic (air sparging) conditions, with a shift from anaerobic to aerobic after 20 min, and Fe(III) added during aerobic phase. Electrochemical measurements (LSV, CV, EIS) were conducted. Samples were analyzed for MO concentration, COD, intermediates, and metal leaching.
5:Data Analysis Methods:
MO decolorization and mineralization were calculated using absorbance and COD measurements. Statistical analysis used one-way ANOVA in SPSS 19.0. Electrochemical data were analyzed with Zsimpwin software.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容-
Gas Chromatography/Mass Spectrometry
C5975C
Agilent
Validates intermediate products of MO degradation.
-
Scanning Electron Microscopy
QUANTA450
FEI company
Characterizes morphology of W and Mo deposits on cathodes.
-
Energy Dispersive X-ray Spectroscopy
X-MAX 20 mm2-50 mm2
Oxford Instruments
Analyzes elemental composition on cathode surfaces.
-
X-ray Diffractometer
XRD-6000
Shimadzu LabX
Investigates crystal form of W and Mo species on cathodes.
-
Cation Exchange Membrane
CMI-7000
Membranes International
Separates the anode and cathode chambers in the MFC, allowing cation exchange.
-
Graphite Felt
Not specified
Sanye Co.
Used as electrode material for anode and cathode due to suitability for H2O2 production.
-
Saturated Calomel Reference Electrode
SCE
Not specified
Monitors cathode potential in the MFC.
-
Iodine Tungsten Lamp
100 W
Not specified
Provides visible light irradiation to the cathode.
-
Potentiostat
VSP
BioLogic
Used for electrochemical measurements including LSV, CV, and EIS.
-
UV Spectrophotometer
UV-5500 PC
Shanghai Metash Instruments Co., Ltd.
Quantifies MO concentration by measuring absorbance at λmax = 465 nm.
-
pH Meter
PHS-3C
Leici
Measures pH of solutions.
-
登录查看剩余9件设备及参数对照表
查看全部