研究目的
To develop a microanalytical system for urea determination in small-volume biological samples, specifically for evaluating urea cycle efficiency in cultured cells, with applications in personalized medicine, tissue engineering, and cytotoxicity studies.
研究成果
The developed LTCC-based microfluidic system successfully enables urea determination in极小体积 samples with high sensitivity and a low detection limit of 0.002 mM. It is suitable for quasi-on-line monitoring in cell culture studies, with a sampling rate of 6 samples per hour and a long operational lifetime of 30 days. The system's performance is competitive with commercial tests, showing differences of only 2-9% in urea concentration measurements, and represents a novel approach for metabolic evaluation in vitro.
研究不足
The system has limitations in sensitivity at higher flow rates due to reduced enzymatic reaction time. The use of small sample volumes (1 μl) may introduce handling challenges, and the presence of interferents like phenol red in culture medium requires careful optimization. The lifetime of the enzymatic microreactor shows a 14% reduction in sensitivity over 30 days, indicating potential degradation. The method is specific to urea and may not be directly applicable to other analytes without modification.
1:Experimental Design and Method Selection:
The study involved designing a microfluidic system using LTCC technology with an enzymatic microreactor for urea hydrolysis and a modified Berthelot's reaction for colorimetric detection. The rationale was to enable sensitive, on-line monitoring of urea in cell cultures with minimal sample volume.
2:Sample Selection and Data Sources:
Samples included urea standards, post-culture medium, and lysates from human hepatoma C3A cells. Selection criteria focused on biological relevance for liver cell studies, with data acquired through spectrophotometric and microfluidic measurements.
3:List of Experimental Equipment and Materials:
Equipment included a peristaltic pump (Reglo Digital MS-4/12, ISMATEC), FTIR spectrometer (Excalibur series FTS 3000MX, BioRad), goniometer (DSA25, KRüSS GmbH), microplate spectrophotometer (Synergy HT, BioTEK), LED light source (L-914HT, Kingbright), photodetector (TSL257-LF, AMS), and various chemicals (e.g., urease from Sigma-Aldrich, sodium salicylate from POCh). Materials involved LTCC tapes (CeramTape GC, Ceramtec GmbH), PMMA optical fibers, and reagents for chemical modifications.
4:Experimental Procedures and Operational Workflow:
Steps included fabrication of the LTCC microfluidic system via laser cutting, lamination, and firing; chemical modification of the microreactor surface for enzyme immobilization; optimization of Berthelot's reaction conditions; and measurements in the microsystem with flow rates varied from 4 to 16 μl/min. Data collection involved absorbance measurements at 700 nm.
5:Data Analysis Methods:
Data were analyzed using Lambert-Beer law for absorbance calculations, with statistical methods for sensitivity, limit of detection, and reproducibility. Software tools for control and data acquisition were not specified.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容