- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Charge and thermal modeling of a semiconductor-based optical refrigerator
摘要： Despite multiple attempts to achieve optical refrigeration in very high (99.5%) external quantum efficiency (EQE) GaAs, no cooling has been observed to date. In this study, we investigate optical refrigeration in GaAs by numerically solving the transient drift-diffusion equation coupled to Poisson’s equation. The charge carrier distributions we obtain, together with the heat diffusion equation, allow us to observe the spatial and temporal evolution of cooling/heating within GaAs. Our results indicate that maximum cooling occurs at a laser intensity different from that which maximizes EQE. An 11-fold difference in intensity exists with a corresponding 6-fold difference in cooling power. We ultimately find that samples suspended in vacuum using a 250 lm SiO2 fiber cool to 88 K, starting from room temperature. These results emphasize the critical importance of choosing an appropriate laser excitation intensity to achieve optical refrigeration along with minimizing the conductive heat load on the refrigerator. Furthermore, results of this study are applicable towards analyzing the optical response of other optoelectronic systems where accurate charge and/or heat diffusion modeling is critical.
关键词： drift-diffusion equation,external quantum efficiency,Poisson’s equation,cooling power,optical refrigeration,heat diffusion equation,GaAs
更新于2025-09-10 09:29:36
-
[ASME ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - San Francisco, California, USA (Monday 27 August 2018)] ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - Practical Concerns for Adoption of Microjet Cooling
摘要： As power densities in advanced electronics continue to rise, the need for high performance thermal solutions becomes increasingly important. Liquid jet impingement has been applied to cooling high power-density electronics due to its ability to dissipate large heat fluxes while maintaining an acceptable operating temperature in the device. Recently, microjets have been embedded within the device substrate, forming a compact solution that is highly scalable. Many practical questions remain, however, on whether microjet technology is ready for actual implementation. In this work, we address several important questions that impede adoption of the technology. Numerical analysis and experimental data are provided to demonstrate the tradeoff between thermal performance and driving pressure requirements through pumping analysis. Additional mechanical concerns regarding robustness to clogging and resistance to erosion are addressed through a 1000-hour extended lifetime test.
关键词： electronics cooling,microjet cooling,erosion,heat transfer,thermal management,clogging
更新于2025-09-09 09:28:46
-
[ASME ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - San Francisco, California, USA (Monday 27 August 2018)] ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - Numerical Investigation of Shape Effect on Microdroplet Evaporation
摘要： As electronic devices continue to shrink in size and increase in functionality, effective thermal management has become a critical bottleneck that hinders continued advancement. Two-phase cooling technologies are of growing interest for electronics cooling due to their high heat removal capacity and small thermal resistance (< 0.3 K-cm2/W) [1]. One typical example of a two-phase cooling method is droplet evaporation, which can provide a high heat transfer coefficient with low superheat. While droplet evaporation has been studied extensively and used in many practical cooling applications (e.g., spray cooling), the relevant work has been confined to spherical droplets with axisymmetric geometries. A rationally designed evaporation platform that yields asymmetric meniscus droplets can potentially achieve larger meniscus curvatures, which give rise to higher vapor concentration gradients along the contact line region and therefore yield higher evaporation rates. In this study, we develop a numerical model to investigate the evaporation behavior of asymmetrical microdroplets suspended on a porous micropillar structure. The equilibrium profiles and mass transport characteristics of droplets with circular, triangular, and square contact shapes are explored using the Volume of Fluid (VOF) method. The evaporative mass transport at the liquid-vapor interface is modeled using a simplified Schrage model [2]. The results show highly non-uniform mass transport characteristics for asymmetrical microdroplets, where a higher local evaporation rate is observed near the locations where the meniscus has high curvature. This phenomenon is attributed to a higher local vapor concentration gradient that drives faster vapor diffusion at more curved regions, similar to a lightning rod exhibiting a strong electric field along a highly curved surface. By using contact line confinement to artificially tune the droplet into a more curved geometry, we find the total evaporation rate from a triangular-based droplet is enhanced by 13% compared to a spherical droplet with the same perimeter and liquid-vapor interfacial area. Such a finding can guide the design and optimization of geometric features to improve evaporation in high performance electronics cooling systems.
关键词： Schrage model,two-phase cooling,droplet evaporation,thermal management,VOF method,microdroplets
更新于2025-09-09 09:28:46
-
Optomechanical Cooling in a Continuous System
摘要： Radiation-pressure-induced optomechanical coupling permits exquisite control of micro- and mesoscopic mechanical oscillators. This ability to manipulate and even damp mechanical motion with light—a process known as dynamical backaction cooling—has become the basis for a range of novel phenomena within the burgeoning field of cavity optomechanics, spanning from dissipation engineering to quantum-state preparation. As this field moves toward more complex systems and dynamics, there has been growing interest in the prospect of cooling traveling-wave phonons in continuous optomechanical waveguides. Here, we demonstrate optomechanical cooling in a continuous system for the first time. By leveraging the dispersive symmetry breaking produced by intermodal Brillouin scattering, we achieve continuous-mode optomechanical cooling in an extended 2.3-cm silicon waveguide, reducing the temperature of a band of traveling-wave phonons by more than 30 K from room temperature. This work reveals that optomechanical cooling is possible in macroscopic linear waveguide systems without an optical cavity or discrete acoustic modes. Moreover, through an intriguing type of wave-vector-resolved phonon spectroscopy, we show that this system permits optomechanical control over continuously accessible groups of phonons and produces a new form of nonreciprocal reservoir engineering. Beyond this study, this work represents a first step toward a range of classical and quantum traveling-wave operations in continuous optomechanical systems.
关键词： Waveguide,Brillouin scattering,Optomechanics,Phonon cooling,Silicon
更新于2025-09-09 09:28:46
-
Reference Module in Earth Systems and Environmental Sciences || Solar Energy in Buildings☆
摘要： Solar Energy can be utilized in many ways (e.g., photovoltaics, solar–thermal–electrical systems, solar ponds, and biomass conversion), but in the current chapter only applications associated with covering the heating and cooling requirements of buildings will be discussed. These applications require low or medium -temperature heat and include water heating, either for domestic hot water systems or swimming pools, space heating, and possibly also space cooling.
关键词： Net Zero Energy Buildings,Economics,Passive Systems,Design Methods,Thermal Behavior of Buildings,Buildings,Solar Energy,Solar Collectors,Space Heating and Cooling Systems,Hot Water Systems
更新于2025-09-09 09:28:46
-
[IEEE 2018 International conference on computation of power, energy, Information and Communication (ICCPEIC) - Chennai, India (2018.3.28-2018.3.29)] 2018 Internat2018 International Conference on Computation of Power, Energy, Information and Communication (ICCPEIC)ional conference on computation of power, energy, Information and Communication (ICCPEIC) - Solar PV Active and Passive Cooling Technologies - A Review
摘要： This paper emphasizes the current advances in cooling techniques and temperature control of Photovoltaic (PV) panel. The Electrical Efficiency of PV panel can be improved by decreasing the panel temperature using various techniques. Several cooling techniques are employed to solar PV and how this cooling technologies have their impact on solar PV are discussed. This paper gives the comparison of different cooling techniques (dynamic and static) and also gives the suggestion that which type of cooling can be adopted to the solar PV by considering various aspects.
关键词： solar,cooling techniques,PV panels,electrical efficiency,renewable energy,photovoltaics
更新于2025-09-09 09:28:46
-
Energy and exergy performance assessment of a novel solar-based integrated system with hydrogen production
摘要： In this study, a new solar power assisted multigeneration system designed and thermodynamically analyzed. In this system, it is designed to perform heating, cooling, drying, hydrogen and power generation with a single energy input. The proposed study consists of seven sub-parts which are namely parabolic dish solar collector, Rankine cycle, organic Rankine cycle, PEM-electrolyzer, double effect absorption cooling, dryer and heat pump. The effects of varying reference temperature, solar irradiation, input and output pressure of high-pressure turbine and pinch point temperature heat recovery steam generator are investigated on the energetic and exergetic performance of integration system. Thermodynamic analysis result outputs show that the energy and exergy performance of overall study are computed as 48.19% and 43.57%, respectively. Moreover, the highest rate of irreversibility has the parabolic dish collector with 24,750 kW, while the lowest rate of irreversibility is calculated as 5745 kW in dryer. In addition, the main contribution of this study is that the solar-assisted multi-generation systems have good potential in terms of energy and exergy efficiency.
关键词： Exergy,Energy,Solar energy,Heating-cooling,Hydrogen,Multigeneration
更新于2025-09-09 09:28:46
-
[ASME ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - San Francisco, California, USA (Monday 27 August 2018)] ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - Heat Transfer Characteristics and Flow Pattern Visualization for Flow Boiling in a Vertical Narrow Microchannel
摘要： For improving the functionality and signal speed of electronic devices, components have been miniaturized and an increasing number of elements have been packaged in the device. As a result there has been a steady rise in the amount of heat necessitated to be dissipated from the electronic device. Recently microchannel heat sinks have been emerged as a kind of high performance cooling scheme to meet the heat dissipation requirement of electronics packaging, In the present study an experimental study of subcooled flow boiling in a high-aspect-ratio, one-sided heating rectangular microchannel with gap depth of 0.52 mm and width of 5 mm was conducted with deionized water as the working fluid. In the experimental operations, the mass flux was varied from 200 to 400 kg/m2s and imposed heat flux from 3 to 20 W/cm2 while the fluid inlet temperature was regulated constantly at 90 ℃. The boiling curves, flow pattern and onset of nucleate boiling of subcooled flow boiling were investigated through instrumental measurements and a high speed camera. It was found that the slope of the boiling curves increased sharply once the superheat needed to initiate the onset of nucleate boiling was attained, and the slope was greater for lower mass fluxes, with lower superheat required for boiling incipience. As for the visualization images, for relatively lower mass fluxes the bubbles generated were larger and not easy to depart from the vertical upward placed narrow microchannel wall, giving elongated bubbly flow and reverse backflow. The thin film evaporation mechanism dominated the entire test section due to the elongated bubbles and transient local dryout as well as rewetting occurred. Meanwhile the initiative superheat and heat flux of onset of nucleate boiling were compared with existing correlations in the literature with good agreement.
关键词： microchannel heat sinks,heat transfer,subcooled flow boiling,electronic cooling,flow pattern visualization
更新于2025-09-09 09:28:46
-
Effects of Skin Surface Temperature on Photoplethysmograph
摘要： Photoplethysmograph (PPG) has been widely used to investigate various cardiovascular conditions. Previous studies demonstrated effects of temperature of the measurement environment; however, an integrated evaluation has not been established in environments with gradual air temperature variation. The purpose of this study is to investigate variations and relationships of blood pressure (BP), PPG and cardiovascular parameters such as heart rate (HR), stroke volume (SV), cardiac output (CO) and total peripheral resistance (TPR), by changing skin surface temperature (SST). Local mild cooling and heating was conducted on 16 healthy subjects. The results showed that local SST changes affected Finometer blood pressures (Finger BP), PPG components and TPR, but not the oscillometric blood pressure (Central BP), HR, SV and CO, and indicated that temperature must be maintained and monitored to reliably evaluate cardiovascular conditions in temperature-varying environments.
关键词： skin surface temperature,Photoplethysmography,vasodilation,local cooling and heating,vasoconstriction,cardiovascular status
更新于2025-09-09 09:28:46
-
Review of Solar Cooling Technologies
摘要： Solar cooling is a clean and cost-effective technology, solar cooling offer environmental benefits including reducing main grid demand and shift the load during peak usage and reduced greenhouse gas emissions. The main objective of this paper is to review and analyze different solar cooling technologies that can be used to provide the required cooling and refrigeration effect from solar energy. This paper is covering a wide range of solar cooling technologies including solar electrical refrigeration system, thermo-mechanical combined power and cooling systems and advanced triple effect refrigeration cycles. This paper includes comparisons of different technologies highlighting the advantages and disadvantages. This comparison would assist the decision makers to select the proper solar cooling technology for specific application.
关键词： Solar cooling,Solar Energy,Air Conditioning,Refrigeration
更新于2025-09-09 09:28:46