Effective detective quantum efficiency of two detectors in a prototype digital breast tomosynthesis

摘要： Digital breast tomosynthesis (DBT) system is a novel imaging modality that strongly depends on the detector performance. The effective detective quantum efficiency (eDQE) is a newly accepted system of performance analysis metric that solves the disadvantages of conventional DQE evaluations, which do not consider clinical operating conditions. To evaluate the eDQE, we used the direct-conversion based Anrad detector and the indirect-conversion based Dexela detector. Our aim is to study the performance of such detectors when they are mounted on a prototype DBT system. The prototype DBT system consists of a CsI(Tl) scintillator/CMOS-based flat panel digital detector and an a-Se based direct conversion detector developed by the Korea Electrotechnology Research Institute (KERI). The performance of the two detectors was compared on the basis of scatter fraction, transmission factor, effective modulation transfer function (eMTF), and effective normalized noise power spectrum (eNNPS). As a result, the Dexela detector is characterized by a decreasing eNNPS trend as the spatial frequency increases, whereas the Anrad eNNPS looks almost independent of the spatial frequency. The eMTF was found to be higher in the Anrad detector compared to that in the Dexela one for all frequencies. The eDQE values at 1 cycle/mm (low frequency) were 0.11 and 0.17 for the Anrad and Dexela detectors, respectively, and the values of the spatial frequency feDQE (0.1), corresponding to eDQE = 0.1, were 1.25 and 2.81 cycles/mm for the Anrad and Dexela detectors, respectively. The Dexela detector also presented a higher contrast-to-noise ratios (CNRs) for all different sizes of μCa groups, thus demonstrating overall better eDQE results in imaging performance compared to the Anrad detector.