- 标题
- 摘要
- 关键词
- 实验方案
- 产品
过滤筛选
- 2018
- sodium lighting system
- modeling
- radiation curves
- LED lighting system
- software goniophotometer
- upper half-space
- Electrical Engineering and Automation
- VSB-TU Ostrava
-
Fluorometric determination of the activity of alkaline phosphatase and its inhibitors based on ascorbic acid-induced aggregation of carbon dots
摘要： The authors describe a fluorometric method for determination of the activity of alkaline phosphatase (ALP) and its inhibitors. Nitrogen and boron co-doped carbon dots (C-dots) with excitation/emission peaks at 490/540 nm act as the fluorescent probe. The C-dots were prepared by hydrothermal carbonization starting from 3-aminophenylboronic acid as the sole precursor. On the basis of the boronic acid-triggered specific reaction with cis-diols, the boronic acid modified C-dots can bind to ascorbic acid that is generated by ALP-catalyzed hydrolysis of ascorbic acid 2-phosphate. This results in particle aggregation and quenching of fluorescence. If the ALP inhibitor Na3VO4 is introduced into the system, the activity of ALP is reduced and the fluorescence of C-dots recovers. This fluorometric method allows for the determination of ALP activity in the range from 0.2 to 6.0 mU mL?1 with a detection limit of 0.16 mU mL?1. The IC50 value for the inhibitor Na3VO4 is 3.6 μM. The method is convenient and cost-effective. It does not require complicated operations and in our perception widens the scope of applications of C-dots in bioanalytical sciences.
关键词： cis-Diols,3-Aminophenylboronic acid,Enzyme inhibition,Fluorometry,Ascorbic acid,Ascorbic acid 2-phosphate,Sodium orthovanadate
更新于2025-11-19 16:46:39
-
High-performance potassium-sodium niobate lead-free piezoelectric ceramics based on polymorphic phase boundary and crystallographic texture
摘要： Lead-free piezoelectric ceramics are urgently needed in the field of electromechanical conversion devices due to the restriction on the use of lead-based ceramics. In this study, the polymorphic phase boundary (PPB) were tuned by incorporating different concentration of (Bi0.5K0.5)HfO3 into the matrix (K0.5Na0.5)(Nb0.965Sb0.035)O3-CaZrO3, and the <00l>c crystallographic texture was realized by templated grain growth method. The maximal d33 (~550 pC/N) and kp (~72%) were achieved in the <00l>c textured ceramics with composition around rhombohedral-orthorhombic-tetragonal (R-O-T) phase boundary. It is proposed that the enhanced piezoelectricity should be ascribed to several combined effects, which primarily contain the R-O-T phase boundary facilitating polarization rotation, the crystallographic orientation induced intrinsic piezoelectric anisotropy, electric-field-induced lattice distortion and phase transitions, and NaNbO3 seed-crystal-driven nanodomain structures. This work provides an effective solution to enhance piezoelectric properties by simultaneous tailoring polymorphic phase boundary and using crystallographic texture in potassium-sodium niobate based piezoelectric ceramics. We believe that the simple solution and design principle can also be applied to other piezoelectric ceramic systems, no matter lead-based or lead-free.
关键词： polymorphic phase boundary,piezoelectricity,potassium-sodium niobate,crystallographic texture
更新于2025-11-14 17:28:48
-
Electrical conductivity and conduction mechanisms in (Na <sub/>0.5</sub> Bi <sub/>0.5</sub> TiO <sub/>3</sub> ) <sub/>1?x</sub> (BiScO <sub/>3</sub> ) <sub/>x</sub> (0.00 ≤ <i>x</i> ≤ 0.25) solid solutions
摘要： The electrical properties of (Na0.5Bi0.5TiO3)1-x(BiScO3)x (NBT-BS, 0.00 ≤ x ≤ 0.25) solid solutions are established by ac impedance spectroscopy and electromotive force transport number measurements. The bulk conductivity decreases with increasing BS incorporation but the oxide-ion transport number remains high (≥0.85) over a wide compositional range 0.00 ≤ x ≤ 0.15 and drops to ≈0.7 for x ≥ 0.20. NBT-BS solid solutions can only present either predominant oxide-ion conduction or mixed ionic-electronic conduction behaviour, indicating that oxide-ion conduction cannot be fully eliminated by incorporation of BS. This is in contrast from our previous study where incorporation of ≈7% BiAlO3 (BA) can fully suppress the oxide-ion conduction in NBT. The conductivity–composition relationships of NBT-BS solid solutions are attributed to a competing effect from lattice expansion, which enlarges the channel for oxygen ion migration, with trapping between B-site acceptor ions, Sc'Ti, and oxygen vacancies, V??O, which decreases oxygen ion migration. Comparisons between NBT-BS, NBT-BA and NBT-BiGaO3 (BG) solid solutions suggest that small acceptor ions on the B-site are more effective in trapping oxygen vacancies and consequently more effective to suppress the oxide-ion conduction and thus reduce dielectric loss at elevated temperatures.
关键词： transport number,electrical conductivity,solid solutions,sodium bismuth titanate,oxide-ion conduction,conduction mechanisms,impedance spectroscopy,BiScO3
更新于2025-11-14 17:28:48
-
Luminescence and electrical properties of Eu-modified Bi <sub/>0.5</sub> Na <sub/>0.5</sub> TiO <sub/>3</sub> multifunctional Ceramics
摘要： The Eu3+ modified Bi0.5Na0.5TiO3 (BNT) ceramics have been fabricated by the solid-state reaction method. The impact of Eu3+ doping on the structure, photoluminescence and electrical properties has been studied by XRD, SEM, PL spectra and LCR meter. X-ray diffraction analysis reveals that the crystal structure of the samples is well matched with the trigonal perovskite, and the optimal temperature of pre-sintering is 880°C. The Eu3+ doped BNT ceramics show excellent red fluorescence at 614nm corresponding to the 5D0→7F2 transition of Eu3+ under 466nm excitation and relatively long fluorescence lifetime. The BNT-0.02Eu ceramic density is up to 5.68g/cm3 and the relative density is up to 94.6% with sintering temperature 1075°C. The piezoelectric constant (d33) of samples has been significantly improved up to 110pC/N by Eu3+ doping. The BNT-0.03Eu ceramic pre-sintered at 880°C and sintered at 1050°C has good dielectric properties and excellent luminescence properties. Eu3+ doped BNT ceramics make it potential applications for novel integrated optical-electro and multifunctional devices.
关键词： luminescence,electrical properties,Bismuth sodium titanate (Bi0.5Na0.5TiO3),lead-free ceramics
更新于2025-11-14 17:28:48
-
Significantly enhanced room temperature electrocaloric response with superior thermal stability in sodium niobate-based bulk ceramics
摘要： Converting electrical into thermal energy in ferroelectrics path the way for a novel cooling technology, be able to open up new fields of applications. For electrocaloric refrigeration, large temperature change (ΔT) and excellent temperature stability are highly desired. Unfortunately, a large room temperature ΔT in lead free bulk ceramics was usually obtained at the expense of temperature stability, and vice versa, limiting their practical applications. In this work, composition engineering is carried out as an important strategy to tune phase transition to room temperature and simultaneously induce diffuse phase transition to achieve excellent temperature stability. A large room temperature ΔT is realized by the application of large electric fields, possibly due to the optimization of the sintering process in sodium niobate based ceramics. The 0.78NaNbO3-0.22BaTiO3 ceramic is found to exhibit both large room temperature ΔT (~ 0.70 K) and superior temperature stability (±1.4% variation in ΔT from 300 K to 380 K). Those properties are superior to previously reported lead-free bulk ceramics. This work provides a guideline for the development of high-performance ceramic materials such as NaNbO3-ABO3 (A=Ba, Sr and Ca; and B=Ti and Zr) for electrocaloric refrigeration. Most importantly, this work expands the applications of NN-based ceramics from electric energy storage, electrostrictive and piezoelectric applications, to a new field, i.e. solid-state refrigeration. This makes NN-based ceramics very promising multifunctional materials for device integration.
关键词： Sodium niobate,relaxor ferroelectrics,electrocaloric effect,adiabatic temperature change,diffuse phase transitions
更新于2025-11-14 17:28:48
-
Spectroscopic and theoretical studies of potassium sodium l-(+)-tartrate tetrahydrate and l-tartaric acid used as precursors for in situ laser-induced deposition of the catalytically active copper microstructures
摘要： In this work we study the influence of l-(+)-КNaC4H4O6 × 4H2O (KNaT) and l-H2C4H4O6 (H2T) on the complexation processes occurring during in situ laser-induced catalytic destruction of the organic components of the aqueous solutions with formation of the unsaturated hydrocarbons. For that purpose, ATR-FTIR, Raman, IR, and NIR spectroscopy as well as quantum chemical calculations were implemented. It was observed that hydration of T2? anion via carboxylate groups is stronger than that via hydroxyl groups. We also established the changes in the spectral characteristics of the absorption bands corresponding to vibrations of T2?, HT?, and H2T, at solid state-liquid and acid-salt transitions, depending on concentration of the solution components and the [OH?]/[H2T] ratio. Finally, it was shown that ethylene is a main product of the catalytic destruction of the copper tartrate complexes.
关键词： IR,Laser-induced copper deposition,DFT calculations,Tartaric acid,ATR-FTIR,Catalysis,NIR,Raman spectroscopy,Sodium potassium tartrate tetrahydrate
更新于2025-10-22 19:40:53
-
Determination of Selectivity Coefficients of Sodium and Potassium Ion-Selective Electrode Using Porous Silicon N-Type (100) Based Extended Gate Field Effect Transistor
摘要： Determination of Selectivity Coefficients of Sodium and Potassium Ion-Selective Electrode Using Porous Silicon N-Type (100) Based Extended Gate Field Effect Transistor
关键词： Sodium,Selectivity Coefficients,Porous Silicon,Extended Gate Field Effect Transistor,Ion-Selective Electrode,Potassium
更新于2025-09-23 15:23:52
-
The ablative fractional coagulation zone influences skin fluorescence intensities of topically applied test molecules-An in vitro study with fluorescence microscopy and fluorescence confocal microscopy
摘要： Background: Ablative fractional laser (AFL) increases uptake of topically applied skin agents. The coagulation zone (CZ) surrounding vertically ablated channels may influence uptake of drugs. Objectives: To investigate impact of CZ thickness on skin fluorescence intensities (FI) of a hydrophilic molecule by means of fluorescence microscopy (FM) and fluorescence confocal microscopy (FCM). Second, to compare FI of hydrophilic and lipophilic test molecules by FCM. Study Design/Methods and Materials: Microchannels with CZ thicknesses of 0, 20, and 80 μm were generated by microneedles or AFL (10,600 nm). Channels were 700 μm deep and number of channels kept constant per skin area. After 4 hours of incubation, FI induced by sodium fluorescein (NAF, hydrophilic, logarithmic partition-coefficient (logP) = -1.52, MW = 376.26) were quantified in both CZ and surrounding skin by FM (0–1,500 μm) and FCM (0–90 μm). FI of NAF and carboxyfluorescein (CAF, lipophilic, logP = 2.9, MW = 376.32) were compared by FCM. Results: By FM, NAF-induced FI were higher in CZ than in surrounding skin (P ≤ 0.001). Highest NAF-FI were induced in skin pretreated with a thin CZ (CZ–20 μm), assessed by both FM and FCM and in particular, FI were higher than in skin pretreated with no CZ (CZ–0 μm) (FM P ≤ 0.041, FCM P < 0.012). Skin FI remained constant to a depth of 500 μm, which corresponded to approximate depth of microchannels (CZ–0 μm, CZ–20 μm, CZ–80 μm: 0–500 μm P ≥ 0.107). In accordance with FM data, FCM showed higher FI within CZ than in surrounding skin, but gradually decreased to zero at a depth of 90 μm. NAF-FI were higher than CAF-FI (P ≤ 0.036), and highest CAF-FI were induced by CZ–0 μm and CZ–20 μm compared to CZ–80 μm (P ≤ 0.009). Conclusions: The influence of the CZ thickness on skin FI differs between small hydrophilic and lipophilic test molecules. Results may have clinical relevance for laser-assisted drug delivery.
关键词： sodium fluorescein,reflectance,carboxyfluorescein,dermatology,drug delivery,skin imaging
更新于2025-09-23 15:23:52
-
Effect of Na doping on structural and optical properties in Cu2ZnSnS4 thin films synthesized by thermal evaporation method
摘要： Quaternary chalcogenide Cu2ZnSnS4 (CZTS) compound, a potential material for application as absorber layer in thin film solar cells, is synthesized by direct melting of the constituent elements taken in stoichiometry compositions. Alkali element Na was incorporated into CZTS thin films synthesized by thermal evaporation method, in order to further improve the structural and optical properties. X-Ray diffraction (XRD), Raman spectroscopy, Energy dispersive spectrometry and optical spectrophotometry were used to characterise the phase purity and optical properties. It showed that the diffusion of Na ions is uniform in the films after annealing. XRD analysis showed that CZTS films possess polycrystalline structure with [221] preferred orientation. Na ions incorporation in CZTS thin films could improve the cristallinity, the graine size and the absorption coefficient. For CZTS: Na 5%, optical results revealed higher absorption coefficient (>105 cm-1) and direct optical band gap of 1.56 eV with p-type conductivity.
关键词： Semiconductors,Sodium doping,Structural properties,Optical properties,Copper zinc tin sulfide,Thin films,Thermal evaporation
更新于2025-09-23 15:23:52
-
Photocatalytic oxidative desulfurization and denitrogenation of fuels over sodium doped graphitic carbon nitride nanosheets under visible light irradiation
摘要： A cost-efficient photocatalytic oxidative denitrogenation and desulfurization system for fuels under visible light was developed on the basis of Na doped g-C3N4 nanosheets catalyst. The process adopted molecular O2 as oxidant to substitute for the expensive H2O2, and it adapted to the removal of small molecules of pyridine and thiophene. Na doped g-C3N4 nanosheets were obtained via a simple mixed-calcination pathway using NaCl as Na source. The structural, photophysical and chemical properties of the photocatalysts were characterized and compared to those of the original g-C3N4. It was verified that Na was successfully doped in the g-C3N4 lattice in a uniform chemical state. Moderate amount of Na doped in g-C3N4 generated the highly dispersed and porous nanosheets, which further improved the surface energy and reduce the recombination rate of electron-hole pairs. Na doped g-C3N4 exhibited enhanced performance simultaneously in the photocatalytic oxidative denitrogenation and desulfurization. The optimal catalyst obtained considerable removal efficiency for pyridine and thiophene, depending on its improved structural and photochemical properties by Na doping. A proposed mechanism revealed that the holes acted as the major active species for the denitrogenation and desulfurization, while the superoxide radicals originating from the combination of electron and O2 gave a promotion effect.
关键词： Pyridine,Sodium doping,Graphitic carbon nitride,Thiophene,Photocatalytic oxidation
更新于2025-09-23 15:23:52