- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
All-Small-Molecule Organic Solar Cells with an Ordered Liquid Crystalline Donor
摘要： A new small-molecule donor, namely BTR-Cl, which possesses a strong liquid crystalline property and high crystallinity, works well with the non-liquid crystalline acceptor Y6 and gives a record-high power conversion efficiency (PCE) of 13.6% in single-junction all-small-molecule organic solar cells. The BTR-Cl:Y6-based device was certified at the National Institute of Metrology, certifying a PCE of 13.0%.
关键词： All-small-molecule organic solar cells,Phase separation,Liquid crystalline donor,Power conversion efficiency,High crystallinity
更新于2025-09-19 17:13:59
-
Light scattering effect of polyvinyl-alcohol/titanium dioxide nanofibers in the dye-sensitized solar cell
摘要： In the present work, polyvinyl-alcohol/titanium dioxide (PVA/TiO2) nanofibers are utilized as a light scattering layer (LSL) on top of the TiO2 nanoparticles photoanode. The TiO2 nanoparticles decorated PVA/TiO2 nanofibers display a power conversion efficiency (PCE) of 4.06%, which is 33% higher than tio2 nanoparticles without LSL, demonstrating the incorporation of PVA/TiO2 nanofibers as LSL reduces the radiation loss and increases the excitation of the electron that leads to high PCE. The incorporation of PVA/TiO2 nanofibers as LSL also increases the electron life time and charge collection efficiency in comparison to the TiO2 nanoparticles without LSL.
关键词： power conversion efficiency,dye-sensitized solar cell,PVA/TiO2 nanofibers,light scattering layer,electron life time
更新于2025-09-19 17:13:59
-
Review on Recent Progress of All‐Inorganic Metal Halide Perovskites and Solar Cells
摘要： All-inorganic perovskites are considered to be one of the most appealing research hotspots in the field of perovskite photovoltaics in the past 3 years due to their superior thermal stability compared to their organic–inorganic hybrid counterparts. The power-conversion efficiency has reached 17.06% and the number of important publications is ever increasing. Here, the progress of inorganic perovskites is systematically highlighted, covering materials design, preparation of high-quality perovskite films, and avoidance of phase instabilities. Inorganic perovskites, nanocrystals, quantum dots, and lead-free compounds are discussed and the corresponding device performances are reviewed, which have been realized on both rigid and flexible substrates. Methods for stabilization of the cubic phase of low-bandgap inorganic perovskites are emphasized, which is a prerequisite for highly efficient and stable solar cells. In addition, energy loss mechanisms both in the bulk of the perovskite and at the interfaces of perovskite and charge selective layers are unraveled. Reported approaches to reduce these charge-carrier recombination losses are summarized and complemented by methods proposed from our side. Finally, the potential of inorganic perovskites as stable absorbers is assessed, which opens up new perspectives toward the commercialization of inorganic perovskite solar cells.
关键词： power conversion efficiency,solar cells,inorganic perovskites,stability,energy loss
更新于2025-09-19 17:13:59
-
Surface-defect passivation through complexation with organic molecules leads to enhanced power conversion efficiency and long term stability of perovskite photovoltaics
摘要： Organic-inorganic hybrid lead halide perovskites (e.g., CH3NH3PbX3, X=Cl, Br, I) possess a unique combination of excellent electronic and photoelectrochemical properties including suitable and tunable bandgap, low exciton binding energy in the range of 9–80 meV, high extinction coefficient, and long electron and hole diffusion lengths, which make them excellent photovoltaic materials. The perovskite layer is at the core of perovskite solar cells (PSCs), whose quality would directly determine the device performance. The deficiency of long-term stability of the hybrid perovskite material has been one of the greatest barriers to the commercialization of PSCs. One of the most important strategies to achieve stable solar cells is to improve the intrinsic stability of the materials. Most recently, Wang et al. reported an in-depth systematic study on molecular defect passivation approaches through the interaction between organic functional groups and demonstrated both enhanced PCE and long term stability.
关键词： long term stability,power conversion efficiency,perovskite photovoltaics,surface-defect passivation
更新于2025-09-19 17:13:59
-
Metala??organic framework nanosheets for enhanced performance of organic photovoltaic cells
摘要： Metal-organic nanosheets (MONs) are an emerging class of two-dimensional materials whose diverse and readily tunable structures make them ideal for use in optoelectronic applications. Here, liquid exfoliation is used to synthesize ultrathin zinc-porphyrin based MONs with electronic and optical properties ideally suited for incorporation into a polythiophene-fullerene (P3HT-PCBM) organic solar cell. Remarkably, the addition of MONs to the photoactive layer of a photovoltaic device results in a power conversion efficiency of 5.2%, almost twice that for reference devices without nanosheets with a simultaneous improvement of Jsc, Voc and FF. Our analysis indicates that the complimentary electronic, optical and structural properties of the MONs allows them to act as a surface to template the crystallization of P3HT leading to a doubling of the absorbance, a tenfold increase in hole mobility and reduced grain size. These results demonstrate the potential of MONs as a tunable class of two-dimensional materials for enhancing the performance of a broad range of organic solar cells and other electronic devices.
关键词： Metal-organic nanosheets,organic photovoltaic cells,power conversion efficiency,liquid exfoliation,zinc-porphyrin
更新于2025-09-19 17:13:59
-
Organic Solar Cells Based on Cellulose Nanopaper from Agroforestry Residues with Efficiency over 16% and Effectively Wide Angle Light Capturing
摘要： Cellulose nanopaper (CNP) was successfully demonstrated for the enhanced efficiency and effectively wide-angle light capturing of organic solar cells (OSCs). The highest power-conversion efficiency (PCE) is up to 16.17%, which is among the excellent results natural materials for OSCs. The effectively wide-angle harvesting is demonstrated in the range from -45 to 45 degrees. Importantly, when the incident angle is 45o, the JSC with CNP is 21.18 mA/cm2, while the corresponding JSC without CNP is only 15.11 mA/cm2, an increase of ~40% is observed. The present PCEs of are found to be enhanced from 9.12% to 12.78%.
关键词： power-conversion efficiency,wide-angle harvesting,organic solar cells,light capturing,Cellulose nanopaper
更新于2025-09-19 17:13:59
-
A nona??fullerene acceptor with chlorinated thienyl conjugated side chains for higha??performance polymer solar cells via toluene processing
摘要： Small molecular acceptors (SMAs) BTC-2F and BTH-2F, based on heptacyclic benzodi(cyclopentadithiophene) electron-donating core (CBT) with chlorinated-thienyl conjugated and thienyl conjugated side chains, respectively, are designed and synthesized. Relative to non-chlorine acceptor BTH-2F, BTC-2F exhibits slightly blue-shifted absorption spectra, similar the lowest unoccupied molecular orbital (LUMO) (-3.91 eV), deeper highest occupied molecular orbital (HOMO) energy level and higher electron mobility than that of BTH-2F. PM6, a wide bandgap polymer, is selected as the donor material to construct bulk heterojunction polymer solar cells processed with nonhalogenated solvent toluene. The optimized PM6:BTC-2F-based device presents a 12.9% power conversion efficiency (PCE), while the PCE of PM6:BTH-2F-based device is only 11.3%. The results suggest that it is an effective strategy to optimize the photoelectric properties of SMAs by incorporating chlorine atom into the conjugated side chains.
关键词： small molecular acceptors,narrow bandgap,power conversion efficiency,chlorinated-thienyl,polymer solar cells
更新于2025-09-19 17:13:59
-
Recent Progress on Indoor Organic Photovoltaics: From Molecular Design to Production Scale
摘要： Recently, indoor photovoltaics have attracted much interest for their ability to power small electronic devices and sensors, especially with the growth of the Internet of Things (IoT). Due to their absorption covering ambient emission spectra and tunable electronic structures, π-conjugated polymers and small molecules are well-suited for these applications. Among many benefits, including their ink processability, lightweight and flexibility; indoor organic photovoltaics (IOPVs) show power conversion efficiencies (PCE) over 26%. It represents a power output over 30 μW cm-2 under office light (500 lux), which is sufficient to operate many electronic devices and sensors with a relatively small photovoltaic area. This focus review highlights the major advances in the material design for IOPVs and includes some industrial insights to reach the production scale criteria.
关键词： indoor photovoltaics,material design,power conversion efficiencies,organic photovoltaics,Internet of Things
更新于2025-09-19 17:13:59
-
Influence of TiO <sub/>2</sub> layer on ultimate efficiencies for planar and nano-textured CH <sub/>3</sub> NH <sub/>3</sub> PbI <sub/>3</sub> solar cells
摘要： The influence of TiO2 layer on the ultimate efficiencies, η, i.e. efficiencies without considering carrier recombination, for the planar and nano-textured CH3NH3PbI3 (MAPbI3) perovskite solar cells (SCs) are investigated. In planar TiO2/MAPbI3 heterojunction SCs, in order to achieve the largest power conversion efficiency (PCE), the TiO2 layer thickness, d1, is important. With the finite difference time domain (FDTD) method, we demonstrated that when the MAPbI3 layer thickness, d2, is 250 nm, which is a common-most MAPbI3 layer thickness for perovskite SCs, η achieves maximum when d1 is 80 nm. Fabricating nano textures on SC surface is an important method to improve the PCE. We studied the effects of d1 and d2 on the optimized η, η0, for two kinds of nano-textured perovskite SCs: the SCs with the nontextured TiO2 layer and the column-shaped nano hollow (CLH) textured MAPbI3 layer, defined as the nontextured-TiO2/CLH-MAPbI3 SCs, and the SCs with CLH textured TiO2 and CLH textured MAPbI3 layers of the same hollow axes and radius, defined as the CLH-(TiO2/MAPbI3) SCs. Generally, when d1 and d2 are fixed, η0 for the CLH-(TiO2/MAPbI3) SC is larger than that for the nontextured-TiO2/CLH-MAPbI3 SC by ca. 5%.
关键词： power conversion efficiency,perovskite solar cell,FDTD method,nano texture,light absorption
更新于2025-09-19 17:13:59
-
Fluorinated solid additives enable high efficiency non-fullerene organic solar cells
摘要： The use of processing additives to optimize active layer morphology in organic solar cells (OSCs) is a simple and impactful way to improve photovoltaic performance. However, the retention of high boiling point liquid additives affects the stability and lifetime of OSCs, necessitating the development of volatilizable additives that can improve efficiency at no cost to long-term device stability. In this study, three novel volatilizable solid additives, INB-1F, INB-3F, INB-5F, with different degrees of fluorination are rationally designed, synthesized, and added into photovoltaic solutions to fabricate OSCs. These additives evaporate upon thermal annealing and exhibit higher volatility as the number of fluorine atoms increases. Our device studies show that these additives can enhance the efficiency of PBDB-T-2F:BTP-4F binary cells from 15.2% to 16.5%, and those of PBDB-T-2F:IT-4F from 12.1% to 13.4%. Molecular dynamic simulations reveal attractive interactions between these additives and the non-fullerene acceptor BTP-4F, leading to enhanced intermolecular π–π stacking among BTP-4Fs, which is a favorable morphology change that we attribute as the origin of the enhanced performance and long-term stability. Our work presents a novel strategy to design new solid additives to replace liquid additives.
关键词： fluorinated solid additives,morphology,power conversion efficiency
更新于2025-09-19 17:13:59