- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Emission of dispersed-type inorganic EL devices with frequency-variable high-voltage oscillation circuit
摘要： Dispersed‐type inorganic electroluminescent (EL) devices composed of a transparent electrode, a phosphor, a dielectric, and a back electrode were prepared under various conditions using a zinc sulfide (ZnS)‐based phosphor. Additionally, a voltage/frequency variable circuit was designed. A compact high‐voltage/frequency variable circuit including three modules for boosting, frequency conversion, and voltage conversion was designed. A 140 Vpp voltage and a frequency in the range of 270 Hz to 2.4 kHz can be controlled by this circuit. The emission has begun to be observed at a voltage about 60 Vpp and a frequency of 400 Hz, at a voltage about 40 Vpp and a frequency of 1.4 kHz, 2.4 kHz, respectively. The emission intensity increased with an increase in frequency; emission with a wavelength of 450 nm was strongly influenced by the frequency. The luminescence and the electrical properties were affected by the preparation conditions including device structures, dispersion of ZnS:Cu, and Cl particles because of the current path generated by defects in the EL cell.
关键词： inorganic,organic dye,electroluminescence,ZnS:Cu,Cl,oscillation circuit,driver circuit
更新于2025-09-23 15:22:29
-
[IEEE 2018 IEEE PES/IAS PowerAfrica - Cape Town, South Africa (2018.6.28-2018.6.29)] 2018 IEEE PES/IAS PowerAfrica - Efficient Energy Management System Using Pir Sensor
摘要： In most developing countries like Nigeria, the demand for electrical energy outweighs the supply. Negative economic and environmental impacts are also associated with its generation, transmission, and consumption. As a result there is need for the available energy to be efficiently managed. This project designed and implemented a microcontroller based energy saver and management system. The design of the energy saver and management system was aimed at coordinating the manner of use of electrical appliances, thereby reducing energy consumption in electrical appliances (such as fan and light) and devising a means of reducing the need for human intervention in the control of electrical appliances in a residential building. The project consists of a PIC microcontroller that utilizes a PIR sensor to detect occupants’ presence in the building; it also has a light intensity detection unit used to determine the level of ambient lighting as well as a temperature sensor to determine ambient temperature. The control signal from the microcontroller was used to operate the load driver circuit to switch the appliances on or off. The results show that the designed system can reduce the level of energy consumption effectively and efficiently.
关键词： load driver circuit,appliances,temperature sensor,light intensity detection,PIC microcontroller,Energy saver and Management system
更新于2025-09-23 15:21:21
-
[IEEE 2019 18th International Conference on Optical Communications and Networks (ICOCN) - Huangshan, China (2019.8.5-2019.8.8)] 2019 18th International Conference on Optical Communications and Networks (ICOCN) - Design of a current modulation driver for an ultra-compact RGB laser
摘要： RGB lasers have been widely used as light sources in projectors, endoscopes, HUD(Head up Displays) and many other displays. In this study, we designed a current driver circuit for an ultra-compact RGB laser, which allows for high speed driving current modulations. This characteristic is suitable for scanning display in many occasions. The laser current driver circuit is consisted of the current driver and the temperature controller. The current driver has three independently high-speed current modulation channels. We have tested the P-I performance of the RGB laser and the highest current modulation speed is 1.55MHz.
关键词： RGB laser module,Current modulation,current driver circuit
更新于2025-09-16 10:30:52