- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Large-area near-infrared perovskite light-emitting diodes
摘要： The performance of perovskite light-emitting diodes (PeLEDs) has progressed rapidly in recent years, with electroluminescence efficiency now reaching 20%. However, devices, so far, have featured small areas and usually show notable variation in device-to-device performance. Here, we show that the origin of suboptimal device performance stems from inadequate hole injection, and that the use of a hole-transporting polymer with a shallower ionization potential can improve device charge balance, efficiency and reproducibility. Using an ITO/ZnO/PEIE/FAPbI3/poly-TPD/MoO3/Al device structure, we report a 799 nm near-infrared PeLED that operates with an external quantum efficiency (EQE) of 20.2%, at a current density of 57 mA cm?2 and a radiance of 57 W sr?1 m?2. The standard deviation in the device EQE is only 1.2%, demonstrating high reproducibility. Large-area devices measuring 900 mm2 operate with a high EQE of 12.1%, and are shown to suit medical applications such as subcutaneous deep-tissue illumination and heart rate monitoring.
关键词： near-infrared,hole injection,medical applications,perovskite light-emitting diodes,large-area
更新于2025-09-11 14:15:04
-
Phosphomolybdic acid as an efficient hole injection material in perovskite optoelectronic devices
摘要： Efficient perovskite devices consist of a perovskite film sandwiched between charge selective layers, in order to avoid non-radiative recombination. A common metal oxide used as a p-type or hole transport layer is molybdenum oxide. MoO3 is of particular interest for its very large work function, which allows it to be used both as an interfacial charge transfer material and a dopant for organic semiconductors. However, high quality and high work function MoO3 is typically thermally evaporated in a vacuum. An alternative solution-processable high work function material is phosphomolybdic acid (PMA), which is stable, commercially available and environmentally friendly. In this Communication, we show the first application of PMA in efficient vacuum processed perovskite devices. We found that the direct growth of perovskite films onto PMA leads to strong charge carrier recombination, hindering the solar cell photovoltage. Using an energetically suitable selective transport layer placed between PMA and the perovskite film, solar cells with efficiency >13% as well as LEDs with promising quantum efficiency can be obtained.
关键词： LEDs,optoelectronic devices,perovskite,hole injection material,phosphomolybdic acid,solar cells
更新于2025-09-04 15:30:14