- 标题
- 摘要
- 关键词
- 实验方案
- 产品
过滤筛选
- 2019
- microwave photonics
- optoelectronic oscillator
- frequency division
- Optoelectronic Information Science and Engineering
- Jinan University
- Charles Darwin University
- University of Ottawa
-
Enhancing the performance of LARP-synthesized CsPbBr <sub/>3</sub> nanocrystal LEDs by employing a dual hole injection layer
摘要： Lead halide perovskites have been considered promising materials for optoelectronic applications owing to their superior properties. CsPbBr3 nanocrystals (NCs) with a narrow particle size distribution and a narrow emission spectrum are synthesized by ligand-assisted re-precipitation (LARP), a low-cost and facile process. In inverted CsPbBr3 NC LEDs, a dual hole injection layer (HIL) of 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile (HAT-CN)/MoO3 is introduced to enhance hole injection and transport, because HAT-CN can extract electrons easily from the hole transport layer and leave a large number of holes there. The current and power efficiencies of the optimized device with a dual HIL are 1.5- and 1.8-fold higher than those of the single HIL device. It is believed that the dual HAT-CN/MoO3 HIL effectively promotes hole injection and has promise for application in many other devices.
关键词： Ligand-assisted re-precipitation,Optoelectronic applications,Lead halide perovskites,CsPbBr3 nanocrystals,Dual hole injection layer,HAT-CN/MoO3
更新于2025-09-23 15:21:01
-
Processing and Study of Optical and Electrical Properties of (Mg, Al) Co-Doped ZnO Thin Films Prepared by RF Magnetron Sputtering for Photovoltaic Application
摘要： In this study, high transparent thin films were prepared by radio frequency (RF) magnetron sputtering from a conventional solid state target based on ZnO:MgO:Al2O3 (10:2 wt %) material. The films were deposited on glass and silicon substrates at the different working pressures of 0.21, 0.61, 0.83 and 1 Pa, 300 °C and 250 W of power. X-ray diffraction patterns (XRD), atomic force microscopy (AFM), UV-vis absorption and Hall effect measurements were used to evaluate the structural, optical, morphological and electrical properties of thin films as a function of the working pressure. The optical properties of the films, such as the refractive index, the extinction coefficient and the band gap energy were systematically studied. The optical band gap of thin films was estimated from the calculated absorption coefficient. That parameter, ranged from 3.921 to 3.655 eV, was hardly influenced by the working pressure. On the other hand, the lowest resistivity of 8.8 × 10?2 ? cm was achieved by the sample deposited at the lowest working pressure of 0.21 Pa. This film exhibited the best optoelectronic properties. All these data revealed that the prepared thin layers would offer a good capability to be used in photovoltaic applications.
关键词： working pressure,Al doped ZnO-MgO powder,RF magnetron sputtering,photovoltaic applications,thin films,solid-state method,optoelectronic properties
更新于2025-09-23 15:21:01
-
Synthesis, DFT studies, fabrication, and optical characterization of the [ZnCMC] <sup>TF</sup> polymer (organic/inorganic) as an optoelectronic device
摘要： A novel carboxymethyl cellulose zinc thin film [ZnCMC]TF was fabricated using the sol–gel technique. Different characterization techniques such as Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, ultraviolet–visible spectroscopy (UV-Vis), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), and the optical properties were used to study the properties of [ZnCMC]TF. The molecular structure, FTIR, and optical properties were optimized. The Raman spectrum of the [ZnCMC]TF complex shows several bands in the range of 72–556 cm?1 due to (nZn–O) stretching and (Zn–O) bending, which is an obvious distinction between the FTIR and Raman spectra of [ZnCMC]TF. The optimization was performed using density functional theory (DFT) by DMol3 and Cambridge Serial Total Energy Package (CASTEP) program. The chemical structure was confirmed by spectroscopic and structural properties for both CMC and [ZnCMC]TF; the XRD results showed the same crystal structure (Monoclinic 2). [ZnCMC]TF has a larger grain size than CMC and has a similar behavior in the optical gap energy. The optical constants increased with increasing photon energy, refractive index n, absorption index k, and optical conductivity. The SEM images provide very good evidence in favor of the reaction of zinc transition metal with CMC for the formation of the [ZnCMC]TF complex. The resulting [CMC] spherical thin film and the [ZnCMC]TF polymeric nanorods were examined by different techniques including TEM and EDX. The optical properties obtained from the simulated FTIR, XRD, and CASTEP are in good agreement with those obtained from the experimental studies on CMC and ZnCMC. Based on the optical findings, [ZnCMC]TF is a promising candidate in applications such as solar cells and optoelectronic devices.
关键词： TEM,DMol3,zinc thin film,carboxymethyl cellulose,UV-Vis,DFT,optoelectronic devices,XRD,EDX,CASTEP,sol–gel technique,SEM,FTIR,optical properties,Raman spectroscopy
更新于2025-09-23 15:21:01
-
Exploring the Carrier Dynamics in Zinc Oxide-Metal Halide Based Perovskites Nanostructures: Towards Reduced Dielectric Loss and Improved Photocurrent
摘要： Metal-halide based perovskites have emerged as a potential candidate for optoelectronic applications due to their impressive performance achieved by tuning the optical/electrical properties through tailoring the perovskite nanostructures. Herein, we report the synthesis of composite nanostructures by incorporation of ZnO (~6 nm) into CsPbBr3 (CPB) perovskite framework, which has significant enhancement of photocurrent, due to efficient interfacial charge separation and reduced dielectric loss. Detailed steady state and time resolved PL studies have been carried out to understand charge transfer dynamics in CsPbBr3/ZnO nanostructure composite system. Femtosecond transient absorption and broadband dielectric spectroscopy studies were carried out to determine the charge carrier relaxation and transfer mechanism. Redox energy level diagram suggests photo-excited electron from conduction band (CB) CPB can be transferred to the CB of ZnO NP due to thermodynamic viability. Ultrafast studies reveal the electron transfer take place from the perovskite nanostructures to ZnO NP within ～500 fs and limits of the recombination process by efficient charge separation and charge accumulation at the interfaces. Dielectric studies also reveal reduced charge leakage in composite nanostructures with efficient charge separation by facilitating the charge accumulation at the interfaces. Overall, the efficient charge transfer and slow carrier recombination with reduced dielectric losses significantly improved the photocurrent behavior CsPbBr3/ZnO nanostructure composite system as desired for optoelectronic devices.
关键词： ZnO,charge transfer dynamics,optoelectronic applications,dielectric loss,photocurrent,Metal-halide based perovskites,CsPbBr3
更新于2025-09-23 15:21:01
-
Two-dimensional Hybrid Halide Perovskites: Principles and Prom-ises
摘要： Hybrid halide perovskites have become the “next big thing” in emerging semiconductor materials as the past decade witnessed their successful application in high-performance photovoltaics. This resurgence has seen enormous and widespread development of the three-dimensional (3D) perovskites, spearheaded by CH3NH3PbI3. The next generation of halide perovskites, however, is characterized by reduced dimensionality perovskites, emphasizing on the two-dimensional (2D) perovskite derivatives which expand as a more diverse subgroup of semiconducting hybrids that possesses even higher tunability and excellent photophysical properties. In this perspective, we begin with a historical flashback that traces back to early reports before the “perovskite fever” and we follow this original work to its fruition in the present day, where 2D halide perovskites are on the spotlight of current research, thriving on several aspects of high-performance optoelectronics. We approach the evolution of 2D halide perovskites from a structural perspective, providing a classification for the diverse structure-types of the materials, which largely dictate the unusual physical properties observed. We sort out the 2D hybrid halide perovskite based on two key components: the inorganic layers and their modification and the organic cation diversity. As these two heterogeneous components blend, either by synthetic manipulation (shuffling the organic cations or inorganic elements) or by external stimuli (temperature and pressure), the modular perovskite structure evolves to construct crystallographically defined quantum wells (QW). The complex electronic structure that arises is sensitive to the structural features that could be in turn used as a knob to control the dielectric and optical properties the QWs. We conclude this perspective with the most notable optoelectronic device achievements that have been demonstrated to date with an eye towards future material discovery and potential technological developments.
关键词： two-dimensional (2D) perovskite derivatives,optoelectronic devices,quantum wells (QW),Hybrid halide perovskites,semiconducting hybrids
更新于2025-09-23 15:21:01
-
Development of multi-function digital optoelectronic integrated sensor
摘要： A multi-function optoelectronic integrated sensor based on the 180 nm standard CMOS process for ambient light detection and position sensing is proposed. The monolithic opto-electronic integrated receiver chip is made of a photodetector (PD), a trans-impedance amplifier (TIA), an analog to digital converter (ADC), and a driving circuit of light-emitting diode (LED). A prototype of the sensor has be implemented and tested, and the opto-electronic model of PD is built and simulated for OEIC Co-design. The sensor has been demonstrated a linear detection of the ambient light with intensity between 0 lux and 10000 lux and the detection precision was measured to be 8.79 lux. The precision of proximity distance detection reaches 0.1mm. Simple recognition of object moving direction can be realized. The sensor can be widely used in smart phones, portable wearable devices and other intelligent product terminals.
关键词： CMOS integrated circuit,position sensing,integrated optoelectronic sensor,ambient light,mixed-signal circuits
更新于2025-09-23 15:21:01
-
Ethanol–water-assisted room temperature synthesis of CsPbBr3/SiO2 nanocomposites with high stability in ethanol
摘要： All-inorganic halide perovskites have attracted great attention by virtue of the merits of bright emission, tunable wavelength and narrow-band emission. Despite the excellent optical features, all-inorganic halide perovskite materials have suffered from intrinsic instability, which has limited their applications in various optoelectronic devices. To mitigate the intractable issue, we demonstrated the CsPbBr3 nanoparticles decorated with smaller SiO2 nanocrystals to passivate the surface defects; SiO2 nanoparticles were applied as a barrier layer to maintain the optical property and enhance environmental stability. A facile in situ method was proposed to prepare CsPbBr3/SiO2 nanocomposites, in which an environmental ethanol/water solvent system was needed with the addition of tetraethyl orthosilicate (TEOS) as a silicon precursor. The obtained CsPbBr3/SiO2 nanocomposites have better optical characteristic and stability than bare CsPbBr3 nanoparticles. Even 70% photoluminescence intensity of as-prepared CsPbBr3/SiO2 nanocomposites can be maintained after 168 h storage in ethanol. This newly developed synthesis will open up a new route for the fabrication of optoelectronic devices in an environmentally friendly way, and the as-obtained perovskite materials with improved stability will make them great potential for multifunctional optoelectronic devices.
关键词： Ethanol–water-assisted room temperature synthesis,All-inorganic halide perovskites,High stability,CsPbBr3/SiO2 nanocomposites,Optoelectronic devices
更新于2025-09-23 15:21:01
-
Prospects of Coupled Organica??Inorganic Nanostructures for Charge and Energy Transfer Applications
摘要： We review the field of organic-inorganic nanocomposites with a focus on materials that exhibit a significant degree of electronic coupling across the hybrid interface. These nanocomposites undergo a variety of charge and energy transfer processes, enabling optoelectronic applications in devices which exploit singlet fission, triplet energy harvesting, photon upconversion or hot charge carrier transfer. We discuss the physical chemistry of the most common organic and inorganic components. Based on those we derive synthesis and assembly strategies and design criteria on material and device level with a focus on photovoltaics, spin memories or optical upconverters. We conclude that future research in the field should be directed towards an improved understanding of the binding motif and molecular orientation at the hybrid interface.
关键词： Inorganic Nanostructures,Self-Assembly,Organic π-Systems,Optoelectronic Devices,Plasmonics
更新于2025-09-23 15:19:57
-
AIP Conference Proceedings [AIP Publishing THE 7TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCE AND TECHNOLOGY (ICAST 2019) - Karbala City, Iraq (27–28 March 2019)] THE 7TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCE AND TECHNOLOGY (ICAST 2019) - Chaos synchronization in quantum dot semiconductor lasers with negative optoelectronic feedback
摘要： Chaos synchronization is investigated in quantum dot semiconductor lasers with negative optoelectronic feedback. Depending on the coupling strength between transmitter and receiver quantum dot semiconductor Laser. Synchronization happens when the coupling strength to the receiver matches the feedback strength to the transmitter, where the receiver output reproduces the output of the transmitter regardless of the presence of channel distortion or an encoded message. when feedback strength of transmitter, receiver quantum dot semiconductor Laser and coupling feedback strength are equal (- 0.3), time delay of transmitter, receiver quantum dot semiconductor Laser and coupling are sensitive to synchronization.
关键词： Chaos synchronization,Quantum dot semiconductor lasers,Negative optoelectronic feedback
更新于2025-09-23 15:19:57
-
Synergistics of Cr(III) doping in TiO2/MWCNTs nanocomposites: Their enhanced physicochemical properties in relation to photovoltaic studies
摘要： In the present investigation, optoelectronic modifications of the TiO2 host lattice through insertion of Cr(III) (0.5–3.0 mol.%) as a dopant and thereafter its composites with MWCNTs prepared using single step in-situ sol-gel route and its photovoltaic performance of the hybrids was investigated using Ru(II) based sensitizer. The physicochemical properties (viz. structural, opto-electrical, morphological and charge transfer behavior) of the ternary Cr@TiO2/MWCNTs NCs are compared with the TiO2/MWCNTs NC through various spectroscopic (XRD, Raman, UV–Visible DRS, XPS, FT-IR, PL, TRPL and EIS measurements) and microscopic (HR-TEM with SAED) analysis. TRPL and EIS studies reveals that, average life time of the electrons in the excited state increases and interfacial charge transfer resistance decreases after the insertion of Cr(III) ion into the TiO2 host lattice. After the detailed physicochemical investigations, binder free NCs were deposited on the F:SnO2 (FTO) by doctor-blade technique using DMF and CH3CN solvents and then anchored with N719 dye. Finally, sensitized photoelectrode sandwiched with Pt-counter electrode for making the sandwich dye sensitized solar cells (DSSCs) and photovoltaic performance of the assembled devices was measured under AM 1.5 solar simulator for I-V and IPCE measurements. The Cr.0.010@Ti0.990C NCs based DSSCs shows highest photovoltaic conversion efficiency up to η = 7.69% which is 20% (η = 6.18%) higher to that of undoped TiO2/MWCNTs based DSSCs.
关键词： Cr(III) doping,Optoelectronic studies,Ternary nanocomposites,Sensitized solar cells
更新于2025-09-23 15:19:57