- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Heterostructures of mesoporous TiO2 and SnO2 nanocatalyst for improved electrochemical oxidation ability of Vitamin B6 in pharmaceutical tablets
摘要： The detection of water soluble vitamins using electrochemical method is widely established in pharmaceutical quality control laboratories, and especially the recent advances in hybrid heterostructure nanomaterials has devoted to enhance the significant analytical parameters like sensitivity, selectivity and fast response time. Herein, we report the synthesis of a hybrid heterostructure comprising SnO2 nanoparticles supported mesoporous TiO2, and the obtained nanocomposite were fabricated over glassy carbon electrode (GCE) for the electrochemical oxidation of vitamin B6 in pharmaceutical tablets. The designed SnO2-TiO2/GC modified electrode exhibits well-defined oxidation peak with lowering over-potential and larger signal response compared to the pristine counterparts, and it is mainly due to the formation of abundant active surface layer offered by SnO2 cocatalyst, and thus significantly enhances the electrochemical surface area. Differential pulse voltammetry (DPV) measurements revealed a sharp increase in the anodic peak current upon addition of increasing concentration of vitamin B6. The analytical performance of the modified electrode displayed a wide linear range (0.1 - 31.4 μM), high selectivity, and excellent sensitivity (759.73 μA mM-1 cm-2) with low detection limit (35 nM). Thus, the resultant mesoporous hybrid nanocatalyst provides an efficient electrochemical platform for determination of various potential analytes.
关键词： electrochemical sensor,Tin oxide (SnO2) cocatalyst,mesoporous,Titanium dioxide (TiO2),Vitamin B6
更新于2025-09-19 17:15:36
-
Low Temperaturea??Processed Zr/F Coa??Doped SnO <sub/>2</sub> Electron Transport Layer for Higha??Efficiency Planar Perovskite Solar Cells
摘要： The energy band position and conductivity of electron transport layers (ETLs) are essential factors that restrict the efficiency of planar perovskite solar cells (p-PSCs). Tin oxide (SnO2) has become a primary material in ETLs due to its mild synthesis condition, but its low conduction band position and limited intrinsic carriers are disadvantageous in electron transport. To solve these problems, this work exquisitely designs a Zr/F co-doped SnO2 ETL. The doping of Zr can raise the conduction band of SnO2, which reduces the energy barrier in electron extraction and inhibits the interface recombination between the ETL and perovskite. The open-circuit voltage (VOC) of p-PSCs consequently increases. F? doping belongs to n-type doping. Thus, it equips SnO2 with a large number of free electrons and improves the conductivity of the ETL and short-circuit current (JSC). The device based on Zr/F co-doped ETL achieves a high efficiency of 19.19% and exhibits a reduced hysteresis effect, which is more satisfactory than that of a pristine device (17.35%). Overall, our research successfully adjusts the energy band match and boosts the conductivity of ETL via Zr/F co-doping. The results provide an effective strategy for fabricating high-efficiency p-PSCs.
关键词： electron transport layer,Zr/F co-doping,energy level match,planar perovskite solar cell,tin oxide (SnO2)
更新于2025-09-19 17:13:59
-
Zwitterion Nondetergent Sulfobetaine-Modified SnO <sub/>2</sub> as an Efficient Electron Transport Layer for Inverted Organic Solar Cells
摘要： Tin oxide (SnO2) has been widely accepted as an effective electron transport layer (ETL) for optoelectronic devices because of its outstanding electro-optical properties such as its suitable band energy levels, high electron mobility, and high transparency. Here, we report a simple but effective interfacial engineering strategy to achieve highly efficient and stable inverted organic solar cells (iOSCs) via a low-temperature solution process and an SnO2 ETL modified by zwitterion nondetergent sulfobetaine 3-(4-tert-butyl-1-pyridinio)-1-propanesulfonate (NDSB-256-4T). We found that NDSB-256-4T helps reduce the work function of SnO2, resulting in more efficient electron extraction and transport to the cathode of iOSCs. NDSB-256-4T also passivates the defects in SnO2, which serves as recombination centers that greatly reduce the device performance of iOSCs. In addition, NDSB-256-4T provides the better interfacial contact between SnO2 and the active layer. Thus, a higher power conversion efficiency (PCE) and longer device stability of iOSCs are expected for a combination of SnO2 and NDSB-256-4T than for devices based on SnO2 only. With these enhanced interfacial properties, P3HT:PC60BM-based iOSCs using SnO2/NDSB-256-4T (0.2 mg/mL) as an ETL showed both a higher average PCE of 3.72%, which is 33% higher than devices using SnO2 only (2.79%) and excellent device stability (over 90% of the initial PCE remained after storing 5 weeks in ambient air without encapsulation). In an extended application of the PTB7-Th:PC70BM systems, we achieved an impressive average PCE of 8.22% with SnO2/NDSB-256-4T (0.2 mg/mL) as the ETL, while devices based on SnO2 exhibited an average PCE of only 4.45%. Thus, the use of zwitterion to modify SnO2 ETL is a promising way to obtain both highly efficient and stable iOSCs.
关键词： inverted organic solar cells (iOSCs),zwitterion nondetergent sulfobetaine (NDSB-256-4T),Tin oxide (SnO2),power conversion efficiency (PCE),electron transport layer (ETL)
更新于2025-09-12 10:27:22