- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
[IEEE 2018 31st International Vacuum Nanoelectronics Conference (IVNC) - Kyoto (2018.7.9-2018.7.13)] 2018 31st International Vacuum Nanoelectronics Conference (IVNC) - Cathodoluminescent lamp for general lighting using carbon fiber field emission cathode
摘要： The prototype of cathodoluminescent bulb for general lighting with field emission cathode on the basis of carbon fiber is manufactured. The bulb comprises a high-voltage built-in AC-DC converter of the electric line voltage and a standard E27 cap. A high frequency converter is used to obtain high voltage. The anode voltage relative to the modulator is up to +20 kV; the cathode voltage is up to –4 kV; the current value is of the order of 1 mA. The voltage converter is located in the bulb cap and around the neck of the glass envelope.
关键词： cathode-ray-tube phosphor,carbon fiber,light sources,field emission cathodes,cathodoluminescence
更新于2025-09-23 15:22:29
-
[IEEE 2018 31st International Vacuum Nanoelectronics Conference (IVNC) - Kyoto, Japan (2018.7.9-2018.7.13)] 2018 31st International Vacuum Nanoelectronics Conference (IVNC) - Stability of carbon nanotube cold cathode electron beam (C-beam) with vacuum brazing process
摘要： A modularization of electronic parts in electrical devices is a key feature for system integration. Especially, x-ray tube fabrication process has been stayed in an obsolete manner due to the utilizing of classical thermionic x-ray sources. But cold cathode emitters such as carbon based materials with nanoscale dimension are expected to replace the conventional wired tungsten filaments due to their outstanding electrical and mechanical properties. To facilitate cold cathode emitter as an x-ray source, state of the arts bonding techniques are required. In this study, carbon nanotube grown Si wafers were successfully bonded to the metal carrier via vacuum brazing process and no electrical degradation of CNT (carbon nanotubes) emitters were observed after the process. Finally, we evaluated the stability of electron beam current density for device reliability. We expect that the cost-effective and facile technique could be applied for cold cathode based x-ray tube manufacturing process.
关键词： carbon nanotubes (CNTs),brazing,x-ray tube,junction,cold cathode
更新于2025-09-23 15:21:21