概述

参数

• 控制器类型 / Controller Style : HCS: Hybrid Control System (External, Detachable, GUI Disabled)
• 用户接口 / User Interface : Hardware Inputs (NPN and PNP Trigger, Analog)
• 工作模式 / Operating Modes : Pulse (Overdrive Strobe), Gated Continuous, Continuous
• 灯头连接 / Light Head Connection : Via B-coded 5-pin Male M12 with Embedded EEPROM (SignaTechTM) on Light Head Cable
• 相机连接 / Camera Connection : HCS-150-ZEB, Via 12-pin Male M12
• 输入电源要求 / Input Supply Requirements : 24 V DC Nominal, 4.5 A Recommended; 24 V Min - 30 V Max; Power Inputs Reverse-Polarity Protected
• 输出通道数量 / Number Of Light Outputs : 1
• 每个输出的通道数量 / Number Of Channels Per Output : 1
• 连续输出功率 / Output Power Continuous : 100W Max*
• 脉冲输出功率 / Output Power Pulsed : 240W Peak*
• 输出电流 / Output Current Continuous : 50 mA to 4 A
• 脉冲输出电流 / Output Current Pulsed : 8 A Max*
• 触发信号 / Trigger Signal : 5 V Min to 30 V Max, <=5 mA, NPN or PNP Inputs
• 触发?；?/ Trigger Protection : 30 V Voltage Clamp and Reverse Polarity Protection
• 触发延迟 / Trigger Delay : 20 μs + 10 μs LED Rise-time
• 触发频率限制 / Trigger Frequency Limit : 2 KHz
• 脉冲宽度范围 / Pulse Width Range : 30 μs – 5 ms (overdrive), >5 ms for gated continuous
• 典型占空比 / Typical Duty Cycle : <1% for high current overdrive
• 调光范围 / Dimming Range : 10% - 100%, Adjustments via Camera Controls (0 - 10 V Analog)
• 状态指示灯 / Status Indicator LEDs : Green: Power, Yellow: Communication, Red: Error
• IP等级 / IP Rating : IP67
• 安装方式 / Mounting : 35 mm DIN-rail or M4 Nut Channels
• 保修 / Warranty : 5 Years
• 合规标准 / Compliance : CE
• 合规标准 / Compliance : RoHS

应用

特征

详述

图片集

规格书

厂家介绍