Diode Laser Surface Treatment of Bearing Steel for Improved Sliding Wear Performance

摘要： The high carbon Cr-bearing SAE 52100 steel grade in hardened and tempered condition is widely applications due to various technological advantages like high hardness, strength and good formability coupled with low cost. However, many-a-times, excessive wear along with applications. Engineering the surface of prior-hardened bearing steel by laser surface hardening to further enhance surface hardness without affecting the bulk can be gainfully utilized for tailoring used for the production of bearings in the automotive industry, the machinery industry, the production of wind turbine and the construction industry. 52100 steel is extensively used for these noise/vibration causes premature failure and/or necessitate early replacement of bearings. Furthermore, contact fatigue and bulk toughness are observed to be inadequate in heavy duty/load indicated enhanced microstructural refinement with partially dissolved carbide globules in PW mode as compared to that processed under Continuous-wave (CW) mode. 25-30% higher peak hardness could be achieved in PW mode with retention in core hardness as compared to that of CW counterpart. Sliding wear testing results showed five-fold and three-fold improvements in un- In the present work, the effect of pulsed-wave (PW) mode of hardening on surface hardening of 52100 bearing steel with prior through-hardened condition is investigated and case depth, hardness, microstructure analysis and tribological properties are discussed in detail. Results lubricated and lubricated conditions in laser processed layer as compared to that of untreated one. On the whole, the PW mode of processing showed vast improvement in hardness and sliding wear tribological properties to improve life. resistance.