- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Flexible Organic Solar Cells Over 15% Efficiency with Polyimide-Integrated Graphene Electrodes
摘要： A highly flexible and durable transparent graphene electrode with thermal stability was developed via the direct integration of polyimide (PI) on graphene. Due to the high transparency of PI-integrated graphene electrode and intimate contact between graphene and PI substrate, high-efficiency flexible organic solar cell with a PCE of 15.2% and outstanding mechanical robustness was obtained.
关键词： Thermal Stability,High Efficiency,Polyimide-Integrated Graphene Electrodes,Flexible Organic Solar Cells,Mechanical Robustness
更新于2025-09-23 15:21:01
-
Mechanically Robust All-Polymer Solar Cells from Narrow Band Gap Acceptors with Hetero-Bridging Atoms
摘要： A series of polymer acceptors PF2-DTC, PF2-DTSi, and PF2-DTGe with identical molecular backbone but different central bridging atoms in tricyclic-fused donor units were developed. In all-PSCs, the PF2-DTSi-based blend film exhibited excellent mechanical robustness with an impressively high PCE of up to 10.77%. Moreover, the flexible solar cell based on this blend retained >90% of its initial PCE after bending and relaxing 1,200 times at a bending radius of ~4 mm.
关键词： Mechanical robustness,All-polymer solar cells,Narrow band gap acceptors,Power conversion efficiency,Hetero-bridging atoms
更新于2025-09-23 15:19:57
-
Origin of the High Donor-Acceptor Composition Tolerance in Device Performance and Mechanical Robustness of All-Polymer Solar Cells
摘要： High tolerance regarding photovoltaic performance in terms of donor:acceptor (D:A) composition ratio is reported for all-polymer solar cells (all-PSCs), which is a crucial advantage in producing large-scale devices with high reproducibility. To understand the origin of high D:A ratio tolerance in all-PSCs, we investigate the molecular weight (MW) effects of the P(NDI2OD-T2) polymer acceptor (PA) on photovoltaic and mechanical robustness of PBDB-T:P(NDI2OD-T2) all-PSCs. Also, we compare the all-PSCs with other types of PSCs consisting of the same polymer donor but using small molecule acceptors (SMAs) including ITIC and PC71BM. It is observed that the D:A ratio tolerances of both the photovoltaic and mechanical properties are highly dependent on the PA MW and the acceptor material types. For example, at a high D:A ratio of 15:1, all-PSCs using high MW PA (number-average molecular weight (Mn)= 97 kg mol-1) exhibit 13 times higher normalized power conversion efficiency (PCE) than all-PSCs using low MW PA (Mn= 11 kg mol-1), and 20 times higher than ITIC-based PSCs. In addition, the electron mobilities in all-PSCs based on high MW PA are well maintained even at very high D:A ratio, whereas the electron mobilities in low MW PA all-PSCs and SMA-based PSCs decrease by 3- and 4-orders of magnitude, respectively, when the D:A ratio increases from 1:1 to 15:1. Thus, we suggest that the formation of tie molecules and chain entanglements by long polymer chains bridging adjacent crystalline domains is the main origin of excellent D:A tolerance in both mechanical robustness and photovoltaic performance. This work provides an important material design guideline for the reproducible production of flexible and stretchable all-PSCs.
关键词： molecular weight effects,mechanical robustness,donor-acceptor composition tolerance,photovoltaic performance,all-polymer solar cells
更新于2025-09-12 10:27:22
-
Facile spraying fabrication of highly flexible and mechanically robust superhydrophobic F-SiO <sub/>2</sub> @PDMS coatings for self-cleaning and drag-reduction applications
摘要： Superhydrophobic coatings treated as surface functional materials are endowed with great application potential with respect to self-cleaning, drag-reduction, anti-icing, etc. In this study, we fabricated a highly flexible and mechanically robust superhydrophobic F-SiO2@PDMS coating through a facile layer-by-layer strategy. It was demonstrated that PDMS played a crucial role of binder for immobilizing the F-SiO2 nanoparticles and improving their adhesion to substrate materials. Meanwhile, the PDMS layer endowed the superhydrophobic coating with superior mechanical flexibility. Finally, the as-constructed superhydrophobic coating exhibited excellent water-repellency with a high water contact angle of 156.5° and low sliding angle of only 2.0°. Furthermore, the water adhesion strength on the superhydrophobic coating was only 2 mN, indicating its ultralow viscous resistance to dynamic moving water droplets. The superhydrophobic F-SiO2@PDMS coating was independent of the substrates without any limitations, and they exhibited high flexibility and mechanical robustness with the elongation ratio reaching 83.3% under the conditions of high superhydrophobicity. Also, the superhydrophobic coating exhibited strong durability under the severe environments of corrosion and mechanical abrasion. Thus, the as-fabricated highly flexible and mechanically robust superhydrophobic F-SiO2@PDMS coating is considered to be an ideal candidate for applications in the fields of self-cleaning and drag-reduction.
关键词： F-SiO2@PDMS,drag-reduction,mechanical robustness,superhydrophobic coatings,self-cleaning
更新于2025-09-04 15:30:14