- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Wear Tribo-Performances of Laser Cladding Colmonoy-6 and Stellite-6 Micron Layers on Stainless Steel 304 Using Yb:YAG Disk Laser
摘要： Stainless steel material has been widely used in aeronautical, chemical and nuclear industries due to good corrosion resistance. However, the material has less hardness and wear resistance. In this study, two various depositions namely Colmonoy-6 and Stellite-6 have produced on 304 Stainless steel. Besides, the coating was examined to reveal their metallurgical, mechanical and tribological properties. In addition, wear mechanism, wear debris and roughness averages were studied. The outcomes indicate that both coatings show with dendrite structure due to rapid cooling rates. Hardness of the clad surface has improved than substrate material. The results of friction coefficient of specimen with Colmonoy-6 is lower than that of specimens Stellite-6 and substrate. Also, wear resistance of Colmonoy-6 has increased 49 times than substrate sample, which reveals that Colmonoy-6 laser cladding plays role on wear resistance. Adhesive and abrasive are the major wear mechanisms in the present study.
关键词： Wear debris,Microstructure,Stainless steel 304,Roughness,Wear performance,XRD,Laser cladding,Hardness
更新于2025-09-12 10:27:22
-
Model of a Light Extinction Sensor for Assessing Wear Particle Distribution in a Lubricated Oil System
摘要： Light extinction based optical wear particle counters (OPCs) have been widely used in the industry for oil condition monitoring for several years, and while experiments have tested the benefits and drawbacks of the measurement principle, limited research has been conducted regarding a theoretical approach to evaluate opportunities and limitations of the measurement scheme. In this paper, we present a method for theoretically modelling the output of an OPC based on the light extinction principle in the regime of geometrical optics, with a special focus on the influence of sensor optical design, particle concentration and measurement noise. Moreover, we show that, if only signal amplitude is considered, an algorithm for evaluating sensor output can cause an erroneous assessment of particle contamination level.
关键词： optical particle counter,particle distribution,wear particle analysis,wear debris,oil condition monitoring,light extinction
更新于2025-09-09 09:28:46