- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
One-step fabrication of effective mesoporous layer consisted of self-assembled MgO/TiO<sub>2</sub> core/shell nanoparticles for mesostructured perovskite solar cells
摘要： perovskite directly, which can not only passivate surface defects and reduce charge-suppressed J-V hysteresis. Meanwhile, the photovoltaic characteristics and the well-power conversion efficiency (PCE) was increased from 13.13% to 16.30% with well-interface and electrons transfer in PSCs. Based on the mesoporous layer consisting of nanoparticles instead of adding an additional surface modified layer for mesostructured recombination, but also facilitate charge-extraction at the mesoporous layer/perovskite perovskite solar cells (PSCs). An amorphous ultrathin outer nanolayer of MgO was Such self-assembled MgO/TiO2 core/shell nanostructures would retain the mesoporous of PSCs was 1.00 V, 4.2% higher than the uncoated TiO2 based PSCs, and the obtained structure feature, supply more contact interface of MgO/TiO2 and separate the TiO2 and conformally coated onto TiO2 core nanoparticles in a one-step bottom-up approach. proposed an efficient nanoparticulate mesoporous layer consisted of coated TiO2 optimized MgO-coated TiO2 nanoparticles, the corresponding open circuit voltage (VOC) Considering the intrinsic rich defect, poor H2O or UV light stability of TiO2, we resistance is obtained for the cell based on m-TiO2 with MgO coating. In addition, we behaved junction property were further clarified by the ideal model, a much lower series provided an easy regulated uniform coating route to fabricate well-defined core-shell nanoparticles with modified properties.
关键词： Uniform coating,mesoporous layer,Core-shell nanostructure,Perovskite solar cells
更新于2025-11-14 15:27:09
-
Plasmonic Electronsa??Driven Solara??toa??Hydrocarbon Conversion over Au NR@ZnO Corea??Shell Nanostructures
摘要： This work demonstrates the long-range redox reactivity of gold plasmon-generated hot electrons for solar-driven CO2 conversion. A series of Au NR@ZnO core-shell photocatalysts with a tunable shell thickness are rationally designed to achieve the solar-to-CH4 conversion, where the hot plasmonic electrons-induced photoreduction takes place on the polar oxide moiety. The shell thickness-independent activity implies that the core, gold nanorods, plays a dominant role in the CH4 generation. The ZnO metal oxide semiconductor shell is beneficial to prolong the lifetime of hot electrons, thereby enhancing the photocatalytic efficiency. However, the thickness of ZnO shell is not relevant to the production rate. Both of these two parts are co-excitated by solar light and synergetic enhance the photocatalytic activity.
关键词： gold nanorod,core-shell nanostructure,ZnO,photocatalysis,CO2 photoreduction,plasmon resonance
更新于2025-09-23 15:19:57
-
TiN-contained polymer-metal core-shell structured nanocone array: Engineering of sensor performance by controlling plasmonic properties
摘要： Metal nanostructures have great potential for optical label-free biosensors based on localized surface plasmon resonance (LSPR). The sensitivity of a metal nanostructure-based label-free biosensor (i.e., plasmonic sensor) depends on its plasmonic properties, which su?er a decrease in sensitivity by energy losses in the metal material. Here, we demonstrate an approach to improve the plasmonic properties of metal nanostructures by controlling the carrier density in the base polymer material using titanium nitride (TiN). It is expected that the light energy absorbed by TiN is converted into excitons, and it will assist LSPs in the metal nanostructure; thus, the losses of the metal material are compensated by the excitons excited in TiN. We designed a TiN-contained polymer-metal core-shell structured nanocone array (NCA), comprising TiN nanoparticles (NPs) in a polymer core and metal shell (Au or Ag), and realized improvement of the refractive index (RI) sensitivity of a label-free biosensor by optimizing the TiN-contained polymer composition. As a result, the TiN-contained polymer-metal NCA, with a TiN NP concentration of 10 wt% in the polymer core, had a 1.5-fold higher RI sensitivity than that of the same NCA without TiN NPs. The results of the resistance measurement of the metal surface with the TiN NP-contained polymer (10 wt%) under light exposure suggest the conversion of exposed light into LSPs of metal via TiN. It is suggested that plasmonic properties and sensor performances can be improved by the presented approach. Moreover, in DNA hybridization detection, an extremely low limit of detection of 117.5 fM was achieved.
关键词： Localized surface plasmon resonance (LSPR),Core-shell nanostructure,DNA detection,Carrier engineering,Biosensor,Titanium nitride
更新于2025-09-16 10:30:52
-
Preparation of core–shell nanostructured black nano-TiO <sub/>2</sub> by sol–gel method combined with Mg reduction
摘要： Black nano-TiO2 samples with core–shell nanostructure were successfully prepared by sol–gel method combined with Mg reduction using butyl titanate as titanium source and calcining at 500°C in air atmosphere and at 400–600°C in nitrogen atmosphere. The prepared black TiO2 samples were characterized by X-ray diffraction, high resolution transmission electron microscopy, Raman spectra, photoluminescence emission spectra, N2 adsorption–desorption, and ultraviolet–visible spectroscopy. The results show that the black TiO2 exhibits a crystalline core–disordered shell structure composed of disordered surface and oxygen vacancies, and the thickness of the disordered layer is about 2–3 nm. The optical absorption properties of black nano-TiO2 samples have been remarkably enhanced in visible light region. Compared with the white TiO2, the reduced black TiO2 samples exhibit enhanced photocatalytic hydrogen production under the full solar wavelength range of light, and the sample prepared with the Mg and TiO2 ratio of 9:1 calcined at 500 °C has the maximum hydrogen production rate.
关键词： core–shell nanostructure,Black nano-TiO2,photocatalytic hydrogen production,sol–gel method,Mg reduction
更新于2025-09-10 09:29:36
-
Characterization of core–shell nanostructure consisting Si–Au–SiO2 based on manipulation of optical properties
摘要： In this article, we investigated some physical characteristics of core–shell nanostructure in optical regime and perturbation has been also introduced as an effective method in shaping of optical properties. The proposed nanostructures are composed of the selected materials as: Silicon, Silicon Dioxide and Gold. At first, the extinction cross section spectra are calculated for multilayer core–shell nanostructures in optical range and the configuration effect of the constructed materials in a multilayer nanostructure are investigated for determination of Plasmon range. Then, the new structures of core–shell nanoparticles (gold–silicon) are presented, which have an amount of impurity particle in their shells as perturbation and also their extinction cross section spectra are calculated. The obtained results in this article give a proper approach about perturbation effect in broadening, sharpening and shifting of optical response which are decisive factors especially nano-network systems. Indeed, it has been proposed that the impurity particles in the shells can be a mechanism for tuning of optical characteristics of the presented nanoparticles in practical fields and also creation of local oscillations as plasmonic resonances in a considered optical range. Besides, redshift in extinction cross section can be also created by particle perturbation. At the end, the effective permittivity of the perturbed core-shells are extracted. The optional frequency range is selected between 300 and 900 (THz).
关键词： Effective permittivity,Perturbation,Nanoparticle impurity,Extinction cross section,Core–shell nanostructure,Plasmonic resonance frequency
更新于2025-09-09 09:28:46
-
Chromium-Doped Zinc Gallogermanate@Zeolitic Imidazolate Framework-8: A Multifunctional Nanoplatform for Rechargeable In Vivo Persistent Luminescence Imaging and pH-Responsive Drug Release
摘要： Multifunctional theranostic nanoplatforms greatly improve the accuracy and effectiveness in tumor treatments. Much effort has been made in developing advanced optical-imaging-based tumor theranostic nanoplatforms. However, autofluorescence and irradiation damage of the conventional fluorescence imaging technologies as well as unsatisfied curative effects of the nanoplatforms remain great challenges against their wide applications. Herein, we constructed a novel core-shell multifunctional nanoplatform, i.e. chromium-doped zinc gallogermanate (ZGGO) near-infrared (NIR) persistent luminescent nanoparticles (PLNPs) as a core and zeolitic imidazolate framework-8 (ZIF-8) as a shell (namely ZGGO@ZIF-8). The ZGGO@ZIF-8 nanoplatform possessed dual functionalities of the autofluorescence-free NIR PersL imaging as well as the pH-responsive drug delivery, thus was highly expected in tumor theranostics. Notably, the loading content of doxorubicin (DOX) in ZGGO@ZIF-8 (?LC = 93.2%) was quite high, and the drug release of DOX-loaded ZGGO@ZIF-8 was accelerated in an acidic microenvironment such as tumor cells. The ZGGO@ZIF-8 opens up a new material system in the combination of PLNPs with metal–organic frameworks (MOFs) and may offer new opportunities for the development of advanced multifunctional nanoplatforms for tumor theranostics, chemical sensing, and optical information storage.
关键词： persistent luminescence imaging,metal–organic frameworks,core-shell nanostructure,pH-responsive drug delivery,tumor theranostics
更新于2025-09-04 15:30:14