- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Micropatterning MoS2/Polyamide Electrospun Nanofibrous Membranes Using Femtosecond Laser Pulses
摘要： The capability of modifying and patterning the surface of polymer and composite materials is of high significance for various biomedical and electronics applications. For example, the use of femtosecond (fs) laser ablation for micropatterning electrospun nanofiber scaffolds can be successfully employed to fabricate complex polymeric biomedical devices, including scaffolds. Here we investigated fs-laser ablation as a flexible and convenient method for micropatterning polyamide (PA6) electrospun nanofibers that were modified with molybdenum disulfide (MoS2). We studied the influence of the laser pulse energy and scanning speed on the topography of electrospun composite nanofibers, as well as the irradiated areas via scanning electron microscopy and spectroscopic techniques. The results showed that using the optimal fs-laser parameters, micropores were formed on the electrospun nanofibrous membranes with size scale control, while the nature of the nanofibers was preserved. MoS2-modified PA6 nanofibrous membranes showed good photoluminescence properties, even after fs-laser microstructuring. The results presented here demonstrated potential application in optoelectronic devices. In addition, the application of this technique has a great deal of potential in the biomedical field, such as in tissue engineering.
关键词： femtosecond laser,micromachining,composite nanofibers,electrospinning,MoS2
更新于2025-11-21 11:08:12
-
Energy transfer in and fluorescence studies of the Eu-Tb doped BPA-phen system
摘要： To enhance the red emission efficiency of Eu3+ complexes, [Eu/Tbx(BPA)3phen] (BPA = bisphenol A, phen = 1,10-phenanthroline) is designed and synthesized. The complexes are characterized fully and their luminescence properties are evaluated. Co-fluorescence is detected in the Eu/Tbx(BPA)3phen complexes, and the existence of Tb3+ enhances the luminescence intensity of the central Eu3+ because of the intramolecular energy transfer from the 5D4 level of Tb3+ to the 5D0 level of Eu3+. The luminescence intensity of europium ions at 615 nm is the highest for Eu/Tb1(BPA)3phen. To improve the thermal stabilities and mechanical properties of pure complexes, Eu/Tb1(BPA)3phen/PAN (PAN = polyacrylonitrile) is used to fabricate fibres by electrospinning. Compared with Eu/Tb1(BPA)3phen (τ = 1.1087 ms), the fibres have a longer fluorescence lifetime of 1.533 ms. The fibres also retain a high quantum yield of 47.16%. Thus, the flexible luminescent fibres have potential applications in many fields.
关键词： electrospinning,Bisphenol A,energy transfer,luminescence
更新于2025-11-20 15:33:11
-
[IEEE 2018 19th International Conference on Electronic Packaging Technology (ICEPT) - Shanghai (2018.8.8-2018.8.11)] 2018 19th International Conference on Electronic Packaging Technology (ICEPT) - Enhancing optical performance of quantum dot-converted LEDs via electrospun fiber rods
摘要： Quantum dots (QDs) have been caught great concern for its excellent performance in the commercial white light-emitting diodes (LEDs). However, QDs show poor light scatter ability, limiting their luminous efficiency enhancement. In this study, a novel scattering structure via electrospinning fiber rods was designed to improve the usage efficiency of QDs in the packaging application. After studying the diffuse properties of the only fiber rod films, they were added into quantum dot-converted LEDs component to study the optical performance of LEDs. Results show that the luminous flux have been enhanced 3.42% when the fiber rod mass ratio is 0.065%, compared to the conventional structure.
关键词： Electrospinning,fiber rod,quantum dot-converted LEDs component,Scattering
更新于2025-11-19 16:46:39
-
Ethanol sensing properties and reduced sensor resistance using porous Nb2O5-TiO2 n-n junction nanofibers
摘要： One-dimensional (1D) and porous Nb2O5-TiO2 n-n junction nanofibers with different Nb molar ratios have been synthesized by a simple electrospinning approach. A decrease in the average grain size and consequently an increase in the specific surface area were observed due to the introduction of Nb2O5 into TiO2 nanofibers. In comparison with pure TiO2 nanofibers, the Nb2O5-TiO2 nanofibers exhibited improved ethanol sensing response and a reduction in electrical resistance. The optimum operation temperature was reduced from 300 °C for pure TiO2 to 250 °C for Nb2O5-TiO2. The best sensing property was found for Nb2O5-TiO2 with 6 mol% Nb2O5, showing the highest response of 21.64–500 ppm ethanol at 250 °C, which was 2.79 times as high as that of pure TiO2 nanofibers at 300 °C. The reduction of Nb2O5-TiO2 based sensor resistance was attributed to the substitution of Ti4+ by Nb5+ ions and the formation of n-n junctions between Nb2O5 nanoparticles and TiO2 nanoparticles. The enhancement sensing mechanism of Nb2O5-TiO2 nanofibers was mainly ascribed to the enhanced resistance modulation owing to the substitution of Ti4+ by Nb5+ ions, formation of n-n junctions, and high surface area as well as small grain size of Nb2O5-TiO2 nanofibers.
关键词： Gas sensor,n-n junctions,Electrospinning,Nb2O5,TiO2
更新于2025-11-14 17:15:25
-
UV-activated porous Zn2SnO4 nanofibers for selective ethanol sensing at low temperatures
摘要： Porous ternary Zn2SnO4 nanofibers with a high surface-to-volume ratio were fabricated through an electrospinning technique. UV-activated ethanol sensing responses at low temperatures were revealed using these porous Zn2SnO4 nanofibers as a sensing active layer. The ethanol response was up to 32.5, and the calculated detection limit was as low as 1.6 ppm at a low temperature of 130 °C. The sensor exhibited good ethanol selectivity and stability under UV irradiation. The photoinduced electrons reacted with the absorbed oxygen molecules to form active O? species [O?(hν)], which contributed to the enhanced resistance modulation and low-temperature ethanol response of Zn2SnO4 nanofibers.
关键词： Zn2SnO4,Semiconductors,Electrospinning,UV irradiation,Sensors
更新于2025-11-14 17:04:02
-
Mg Doped Perovskite LaNiO <sub/>3</sub> Nanofibers as an Efficient Bifunctional Catalyst for Rechargeable Zinc–Air Batteries
摘要： Rational design of efficient and durable bifunctional catalysts toward oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is important for rechargeable zinc-air batteries. Herein, Mg doped perovskite LaNiO3 (LNO) nanofibers (LNMO NFs) were prepared by a facile electrospinning method combined with subsequent calcination. LNMO NFs show a more positive half-wave potential of 0.69V and a lower overpotential of 0.45 V at a current density of 10 mA cm-2 than those of the pristine LNO NFs. As an air electrode for zinc-air battery, the cell with LaNi0.85Mg0.15O3 NFs catalyst is able to deliver a high specific capacity of 809.9 mAh g-1 at a current density of 5 mA cm-2. It also shows an excellent cycling stability over 110 h at a current density of 10 mA cm?2. DFT calculation results demonstrate that the LNMO surface binds oxygen stronger than LNO, which contributes to enhanced OER activity as observed in our experiments. The results indicate that LNMO NFs is an efficient and durable bifunctional catalyst for zinc-air batteries.
关键词： bi-functional catalyst,Mg doped LaNiO3 nanofibers,electrospinning,density functional theory calculation,zinc-air batteries
更新于2025-11-14 17:04:02
-
Melt Electrowriting of Electroactive Poly(vinylidene difluoride) Fibers
摘要： Poly(vinylidene difluoride) (PVDF) has piezoelectric properties suitable for numerous applications such as flexible electronics, sensing and biomedical materials. In this study, individual fibers with diameters ranging from 17-55 μm were processed using melt electrowriting (MEW). Electroactive PVDF fibers can be fabricated via MEW, while the polymer could remain molten for up to ten hours without noticeable changes in the resulting fiber diameter. MEW processing parameters for PVDF were investigated, including applied voltage, pressure and temperature. A rapid fiber characterization methodology for MEW that automatically determines the fiber diameters from camera images taken of microscope slides was developed and validated. The outputs from this approach followed previous MEW processing trends already identified with different polymers, although overestimation of the < 25 micron fiber diameters was observed. The transformation of the PVDF crystalline phase to the electroactive β-phase – without poling – was confirmed using piezo-force microscopy and revealed that the PVDF fibers possess piezoelectric responses showing d33~19 pm/V.
关键词： melt electrospinning writing,piezoelectric,electrohydrodynamic,piezoresponse force microscopy,3D printing
更新于2025-09-23 15:23:52
-
Multi-arm polymers prepared by atom transfer radical polymerization (ATRP) and their electrospun films as oxygen sensors and pressure sensitive paints
摘要： New oxygen and pressure sensitive paints (PSPs) with four-arm polymeric structures were prepared by using a kind of controlled living polymerizations - atom transfer radical polymerization (ATRP). The polymers composing of poly(isobutyl methacrylate)-co-poly(trifluoroethyl methacrylate)s (PolyIBMA-co-PolyTFEM)s act as the matrices for the platinum porphyrin-based phosphorescence probes, which were copolymerized in the matrices. The polymers were characterized by using 1H-NMR, 19F-NMR, and GPC to demonstrate their successful preparation. The influence of polymer structures on sensing activity including the sensitivity and response time to oxygen and/or pressure was investigated. Results showed that copolymers with suitable compositions (herein P3) can have highest sensitivity. Polymer structure's influence on response time to oxygen was also investigated. For increasing the polymer's surface area for further improving sensing sensitivity, electrospinning method was used for preparing films with micro-spherical or fibrous structures. The morphologies of electrospinning coated films were observed by SEM. Results showed that electrospinning coated films can respond much better to oxygen and pressure than their corresponding sprayed plates. This is the first time to apply the controlled living polymerization approach to prepare PSPs with multi-arm structures, which will broaden the PSP functional materials' design strategy.
关键词： oxygen sensing,pressure sensitive paints,electrospinning,multi-arm polymers,atom transfer radical polymerization
更新于2025-09-23 15:23:52
-
Surface potential tailoring of PMMA fibers by electrospinning for enhanced triboelectric performance
摘要： Triboelectric generators rely on contact-generated surface charge transfer between materials with different electron affinities to convert mechanical energy into useful electricity. The ability to modify the surface chemistry of polymeric materials can therefore lead to significant enhancement of the triboelectric performance. Poly(methyl methacrylate) (PMMA) is a biocompatible polymer commonly used in medical applications, but its central position on the triboelectric series, which empirically ranks materials according to their electron-donating or electron accepting tendencies, renders it unsuitable for application in triboelectric generators. Here, we show that the surface potential of PMMA fibers produced by electrospinning can be tailored through the polarity of the voltage used during the fabrication process, thereby improving its triboelectric performance, as compared to typically spin-coated PMMA films. The change in surface chemistry of the electrospun PMMA fibers is verified using X-ray photoelectron spectroscopy, and this is directly correlated to the changes in surface potential observed by Kelvin probe force microscopy. We demonstrate the enhancement of triboelectric energy harvesting capability of the electrospun PMMA fibers, suggesting that this surface potential modification approach can be more widely applied to other materials as well, for improved triboelectric performance.
关键词： Energy harvesting,Triboelectric generator,Surface chemistry,Kelvin probe force microscopy,Electrospinning,Poly(methyl methacrylate)
更新于2025-09-23 15:23:52
-
Conjugate Electrospinning Construction of Microyarns with Synchronous Color-Tuned Photoluminescence and Tunable Electrical Conductivity
摘要： Here, we report a strategy for constructing {[Tb(BA)3phen + Eu(BA)3phen]/PAN}//[PANI/PAN] (BA = benzoic acid, phen = phenanthroline, PANI = polyaniline, PAN = polyacrylonitrile) hetero-structured microyarns simultaneously endowed with the bi-functionality of tunable luminescence colors and electrical conductivity by using a conjugate electrospinning technique. The obtained hetero-structured microyarns are composed of [Tb(BA)3phen + Eu(BA)3phen]/PAN luminescent nano?bers and PANI/PAN electrically conductive nano?bers, realizing ef?cient separation of dark-colored PANI from rare earth (RE) complexes, and thus the enhanced luminescent performance is obtained. Under 276-nm ultraviolet light excitation, the emitting light color of the hetero-structured microyarns can be adjusted in a broad range of green–yellow–red by changing the proportion of RE complexes. The electrical conductivity of the hetero-structured microyarns also can be modulated via tuning the percentages of PANI. These hetero-structured microyarns, by virtue of their luminescent properties and electrical performance, are expected to be applied in multifunctional applications.
关键词： photoluminescence,conjugate electrospinning,Microyarn,electrical properties
更新于2025-09-23 15:23:52