- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
With PBDB-T as the Donor, the PCE of Non-Fullerene Organic Solar Cells Based on Small Molecule INTIC Increased by 52.4%
摘要： At present, most high-performance non-fullerene materials are centered on fused rings. With the increase in the number of fused rings, production costs and production difficulties increase. Compared with other non-fullerenes, small molecule INTIC has the advantages of easy synthesis and strong and wide infrared absorption. According to our previous report, the maximum power conversion efficiency (PCE) of an organic solar cell using PTB7-Th:INTIC as the active layer was 7.27%. In this work, other polymers, PTB7, PBDB-T and PBDB-T-2F, as the donor materials, with INTIC as the acceptor, are selected to fabricate cells with the same structure to optimize their photovoltaic performance. The experimental results show that the optimal PCE of PBDB-T:INTIC based organic solar cells is 11.08%, which, thanks to the open voltage (VOC) increases from 0.80 V to 0.84 V, the short circuit current (JSC) increases from 15.32 mA/cm2 to 19.42 mA/cm2 and the fill factor (FF) increases from 60.08% to 67.89%, then a 52.4% improvement in PCE is the result, compared with the devices based on PTB7-Th:INTIC. This is because the PBDB-T:INTIC system has better carrier dissociation and extraction, carrier transportation and higher carrier mobility.
关键词： polymer solar cells (PSCs),synthesize easily,carrier transportation and extraction,carrier mobility,strong and wide infrared absorption,non-fullerene small molecule acceptor
更新于2025-09-23 15:19:57
-
Recent Progress in Carbon-Based Buffer Layers for Polymer Solar Cells
摘要： Carbon-based materials are promising candidates as charge transport layers in various optoelectronic devices and have been applied to enhance the performance and stability of such devices. In this paper, we provide an overview of the most contemporary strategies that use carbon-based materials including graphene, graphene oxide, carbon nanotubes, carbon quantum dots, and graphitic carbon nitride as buffer layers in polymer solar cells (PSCs). The crucial parameters that regulate the performance of carbon-based buffer layers are highlighted and discussed in detail. Furthermore, the performances of recently developed carbon-based materials as hole and electron transport layers in PSCs compared with those of commercially available hole/electron transport layers are evaluated. Finally, we elaborate on the remaining challenges and future directions for the development of carbon-based buffer layers to achieve high-efficiency and high-stability PSCs.
关键词： carbon materials,polymer solar cells (PSCs),work function,buffer layer
更新于2025-09-12 10:27:22