研究目的
Rapid detection of water pollution that occurs due to both human activity and natural cataclysms is imperative for environmental protection.
研究成果
The study introduces a new approach for the remote detection of trace amounts of multiple heavy metal ion pollutants in water using laser filaments in air. The technique is quantitatively measured with the ppm-level accuracy and is insensitive to the movements of the water surface due to the topography and water waves.
研究不足
The study is a proof-of-principle demonstration on a laboratory scale. The scalability of this technique to practically relevant standoff distances is discussed but not fully demonstrated.
1:Experimental Design and Method Selection:
The study uses ultraintense femtosecond laser pulses propagating in air in the filamentation regime for the simultaneous measurement of several representative heavy-metal contaminants in water.
2:Sample Selection and Data Sources:
Water samples contaminated with heavy-metal elements such as lead, copper, cadmium, mercury, and arsenic were used.
3:List of Experimental Equipment and Materials:
A commercial Ti:Sapphire laser system (Spectra Physics, Spitfire ACE) was used to generate 200 femtosecond-long laser pulses at the center wavelength of 800 nm.
4:Experimental Procedures and Operational Workflow:
The laser beam was weakly focused with a 100 cm focal-length lens onto the surface of water inside an open water tank. The self-focusing of the beam in the air resulted in the formation of an ≈6 cm long laser filament.
5:Data Analysis Methods:
The spectral data were analyzed using a spectrometer equipped with a 1200 lines per millimeter grating and a gated, intensified CCD camera.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容