研究目的
Investigating a simple method for achieving white emission from a single-stack OLED with three emitters using a laterally structured shadow mask to decouple recombination zones for simultaneous emission from all emitters.
研究成果
The study demonstrates a novel method for manufacturing WOLEDs using a laterally structured shadow mask, achieving white EL emission with high CRI and efficiency. The method's simplicity and tunability are highlighted by its applicability regardless of the charge transporting method or green emitter type used.
研究不足
The method's consistency may be affected by the device position in the evaporation chamber, leading to slight scattering in the final EL emission. Further improvements could be achieved by fine-tuning transporting layer thicknesses and selecting different emitter systems for higher efficiency values.
1:Experimental Design and Method Selection:
The study utilizes a laterally structured shadow mask to deposit the green emitter on top of a uniformly deposited blue-red triplet harvesting system, allowing decoupling of recombination zones.
2:Sample Selection and Data Sources:
OLED devices with different transport layers or green emitters were fabricated and characterized.
3:List of Experimental Equipment and Materials:
Includes ITO, Spiro-TTB:F6-TCNNQ, NPB, 4P-NPD:Ir(MDQ)2(acac), CBP:4CzIPN, BPhen, BPhen:Cs, Al, MoO3, mCP, TPBi, LiF.
4:Experimental Procedures and Operational Workflow:
The green emitting layer is deposited via a striped shadow mask on top of the blue-red emitting layer, with other layers deposited through a default shadow mask.
5:Data Analysis Methods:
Current-voltage-luminance (j-V-L) characteristics, EQE, luminous efficacy, and emission spectra were measured and analyzed.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容-
ITO
Used as a transparent conductive electrode in OLED devices.
-
Spiro-TTB:F6-TCNNQ
Used as a hole injection and transport layer in OLED devices.
-
NPB
Used as a hole transport and electron blocking layer in OLED devices.
-
4P-NPD:Ir(MDQ)2(acac)
Used as a red phosphorescent emitter in the triplet harvesting unit of OLED devices.
-
CBP:4CzIPN
Used as a green TADF emitter in OLED devices.
-
BPhen
Used as an electron transport and hole blocking layer in OLED devices.
-
BPhen:Cs
Used as an electron transport and injection layer in OLED devices.
-
Al
Used as a cathode in OLED devices.
-
MoO3
Used as a hole injection layer in OLED devices.
-
mCP
Used as an exciton blocking layer in OLED devices.
-
TPBi
Used as an electron transport layer in OLED devices.
-
LiF
Used as an electron injection layer in OLED devices.
-
登录查看剩余10件设备及参数对照表
查看全部