研究目的
To study the effect of active layer thickness on the photovoltaic performance of inverted bulk heterojunction (BHJ) organic solar cell (OSC).
研究成果
The study concludes that the active layer thickness significantly affects the photovoltaic performance of OSCs, with an optimal thickness of 150 nm yielding the highest PCE. Thicker layers lead to increased recombination and reduced charge collection efficiency, adversely affecting the device performance.
研究不足
The study is limited to the PTB7:PC70BM BHJ system and does not explore other material combinations. The analysis is also constrained by the specific fabrication and characterization techniques used.
1:Experimental Design and Method Selection:
The study involved fabricating OSCs with different active layer thicknesses (100 nm, 150 nm, 200 nm) and analyzing their performance using capacitance-voltage (C–V), dark current-voltage (I–V), and impedance spectroscopy (IS) techniques.
2:Sample Selection and Data Sources:
The OSCs were fabricated using PTB7:PC70BM blends as the active layer, with ZnO and MoO3 as electron and hole transport layers, respectively.
3:List of Experimental Equipment and Materials:
Materials included PTB7, PC70BM, chlorobenzene, diiodooctane, MoO3, and Ag. Equipment used were Near Normal Spectroscopic Reflectrometer, PerkinElmer Lambda 750 UV–Vis–NIR Spectrophotometer, Keithley 4200 SCS, LOT-Oriel Sun Simulator, and Autolab PGSTAT
4:Experimental Procedures and Operational Workflow:
The OSCs were fabricated on ITO-coated glass substrates, with the active layer spin-coated at different speeds to achieve varying thicknesses. The devices were then characterized for their photovoltaic performance.
5:Data Analysis Methods:
The data were analyzed to understand the impact of active layer thickness on the photovoltaic parameters, including Jsc, VOC, FF, and PCE.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容