研究目的
Investigating the feasibility and effectiveness of a dc-based open energy system (OES) for exchanging intermittent energy between houses in a local community to improve solar replacement ratio and reduce ac grid consumption.
研究成果
The study demonstrates the feasibility of a dc-based open energy system (OES) for improving solar replacement ratio and reducing ac grid consumption through power interchange between houses. The concept's practical implementation shows promise for future energy distribution systems, especially in areas with high renewable energy penetration.
研究不足
The study is limited by the current setup's homogeneity and the need for further research to optimize power exchange strategies and scalability for larger systems.
1:Experimental Design and Method Selection:
The study involves the design and implementation of a dc-based open energy system (OES) that includes photovoltaic panels, batteries, bidirectional dc–dc converters, and network controllers for power exchange between houses.
2:Sample Selection and Data Sources:
Real-demand data for four houses from the electricity demand annual database of 100 houses in Kyushu, Japan, was used for simulations.
3:List of Experimental Equipment and Materials:
The setup includes dc nanogrids, PV panels, batteries, bidirectional dc–dc converters, network controllers, dc breakers, and testing equipment like dc load, ac load, and dc power supply.
4:Experimental Procedures and Operational Workflow:
The study involved setting up a physical model of a four-node OES, implementing control software for autonomous power exchange, and conducting simulations to evaluate different power exchange strategies.
5:Data Analysis Methods:
The effectiveness of the OES was evaluated based on the solar replacement ratio, which reflects the actual contribution of solar power after accounting for losses.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容-
dc nanogrid
Serves as the core element of each subsystem, including photovoltaic panels, batteries, and a controller for basic monitoring and control.
-
bidirectional dc–dc converter
Enables power exchange between houses over an external dc power bus.
-
network controller
Communicates with the internal nanogrid controller and can monitor and control the dc–dc converter, establishing network communication and serving as an interface to all hardware units.
-
PV panels
Serve as power sources within the dc nanogrid.
-
batteries
Act as storage devices within the dc nanogrid, capable of acting either as load or power sources.
-
dc breakers
10 A dc
Used to disconnect the house from the others in the dc power bus line.
-
ethernet LAN
Provides the communication network for the network controllers based on Internet protocol (IP).
-
登录查看剩余5件设备及参数对照表
查看全部