研究目的
Investigating the improved ferroelectric response of pulsed laser deposited BiFeO3-PbTiO3 thin films around morphotropic phase boundary with interfacial PbTiO3 buffer layer.
研究成果
The study demonstrates that the use of a PT buffer layer significantly enhances the room temperature ferroelectric properties of BF-xPT thin films, achieving high polarization and reduced electrical leakage. The structural and domain analysis provides insights into the mechanisms behind the improved performance.
研究不足
The study is limited by the polycrystalline nature of the thin films and the potential for defects and strain effects influencing the ferroelectric properties. The exact role of the PT buffer layer in reducing leakage needs further investigation.
1:Experimental Design and Method Selection:
The study involved the preparation of BF-xPT thin films using pulsed laser deposition (PLD) with a PbTiO3 (PT) buffer layer to enhance ferroelectric properties.
2:Sample Selection and Data Sources:
Thin films of BF-xPT with compositions near the MPB (x =
3:20–35) were prepared on Pt/Ti/SiO2/Si substrates. List of Experimental Equipment and Materials:
High-purity bismuth oxide (Bi2O3), iron oxide (Fe2O3), lead oxide (PbO), and titanium dioxide (TiO2) were used for target preparation. A KrF excimer laser (COHERENT CompexPro205) was used for PLD.
4:Experimental Procedures and Operational Workflow:
The targets were prepared by solid-state reaction, and thin films were deposited at 550°C under
5:2 mbar oxygen pressure. Post-deposition annealing was performed at 650°C for 20 min. Data Analysis Methods:
Structural characterization was done using GIXRD, SEM, AFM, and Raman spectroscopy. Electrical properties were measured using a ferroelectric tester and impedance analyzer.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容-
Ferroelectric tester
Precision Premier II
Radiant Technologies Inc.
Used for measuring ferroelectric properties and electrical leakage.
-
KrF excimer laser
CompexPro205
COHERENT
Used for pulsed laser deposition of thin films.
-
PANalytical X’PertPRO MRD diffractometer
X’PertPRO MRD
PANalytical
Used for grazing incidence x-ray diffraction (GIXRD) mode for phase analysis.
-
FE-SEM
JSM-7100F
JEOL
Used for cross-sectional scanning electron microscopy.
-
Atomic force microscope
MFP-3D
Asylum Research
Used for topological characterization and piezoresponse force microscopy (PFM).
-
Micro-Raman spectrometer
STR-300
Used for ambient temperature micro-Raman analysis.
-
Impedance analyzer
HP 4294A
HP
Used for measuring dielectric properties.
-
登录查看剩余5件设备及参数对照表
查看全部