研究目的
Investigating the removal of commonly used PhACs including CBZ and DCF from aqueous matrices by heterogeneous photocatalytic degradation using Ag2O/P-25 photocatalyst.
研究成果
The 5% Ag2O/P-25 photocatalyst effectively removed CBZ and DCF from wastewater, with optimal removals of 89.10% and 93.5% in DW matrix at 0.4 g L-1 catalyst dose. In RME matrix, higher doses were needed due to matrix effects. Kinetics followed the Langmuir-Hinshelwood model, with photo-induced holes and ?OH as dominant species. The catalyst showed good reusability, and intermediates were identified, proposing a degradation pathway. The method is promising for real wastewater treatment.
研究不足
The study is limited to specific PhACs (CBZ and DCF) and matrices (DW and RME). The photocatalytic efficiency may be affected by organic matter and scavengers in real effluents, requiring higher catalyst doses. The reusability showed some inhibition for DCF degradation over cycles.
1:Experimental Design and Method Selection:
The study used heterogeneous photocatalysis with a composite Ag2O/P-25 photocatalyst synthesized via a pH-mediated chemical precipitation method. Experiments were conducted in a self-made continuous stirred photochemical reactor with UV irradiation.
2:Sample Selection and Data Sources:
Model solutions were prepared by spiking CBZ or DCF in deionized water (DW) and real membrane bioreactor effluent (RME). The MBR effluent was from a pilot plant in Finland.
3:List of Experimental Equipment and Materials:
Equipment included a photochemical reactor with UV lamp, SEM (Hitachi SU3500), BET analyzer (Tristar II Plus), UV-Vis spectrophotometer (Perkin Elmer Lambda 45), FT-ICR mass spectrometer (Bruker solariXTM XR), and TOC analyzer (Shimadzu). Materials included chemicals from Sigma-Aldrich such as CBZ, DCF, Aeroxide P-25 TiO2, AgNO3, NaOH, etc.
4:Experimental Procedures and Operational Workflow:
Photocatalytic degradation experiments involved dispersing photocatalyst in solution, stirring in dark for adsorption-desorption equilibrium, irradiating with UV light, sampling at intervals, filtering, and analyzing concentrations and mineralization.
5:Data Analysis Methods:
Data were analyzed using UV-Vis spectrophotometry for concentration changes, DOC measurements for mineralization, and FT-ICR MS for intermediate identification. Kinetics were fitted to the Langmuir-Hinshelwood model.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容-
Scanning Electron Microscope
SU3500
Hitachi
Examining microstructure and morphology of photocatalysts
-
UV-Vis Spectrophotometer
Cary 5000
Agilent
Measuring UV-vis diffuse reflectance spectra
-
FTIR Spectrometer
Platinum ATR VERTEX 70
Bruker
Performing Fourier transfer infrared spectroscopy
-
UV-Vis Spectrophotometer
Lambda 45
Perkin Elmer
Analyzing concentration changes of CBZ and DCF
-
FT-ICR Mass Spectrometer
solariXTM XR
Bruker
Analyzing degradation products of CBZ
-
TiO2 Photocatalyst
Aeroxide P-25
Sigma-Aldrich
Base material for composite photocatalyst
-
Energy-Dispersive X-ray Spectroscope
Thermo Fisher
Elemental analysis of photocatalyst
-
BET Surface Area Analyzer
Tristar II Plus
Determining surface area
-
UV Lamp
Trojan
Providing UV irradiation for photocatalytic reactions
-
TOC Analyzer
Shimadzu
Measuring dissolved organic carbon for mineralization assessment
-
Nylon Membrane
0.45 μm
VWR
Filtering mixtures during synthesis
-
登录查看剩余9件设备及参数对照表
查看全部