研究目的
To enhance the photocatalytic activity of rutile TiO2 for hydrogen evolution by designing a facet heterojunction structure to improve electron-hole pair separation.
研究成果
The facet heterojunction structure significantly enhances the photocatalytic performance of rutile TiO2, achieving up to 45 times higher photocurrent and 18 times higher H2 production rate compared to pure rutile TiO2, with good stability. This approach provides a rational design strategy for efficient photocatalysts in water splitting.
研究不足
The study is limited to rutile TiO2 and may not generalize to other photocatalysts. The experimental conditions use UV light and specific sacrificial agents, which might not be optimal for all applications. Scalability and cost-effectiveness for commercial use are not addressed.
1：Experimental Design and Method Selection:
The study involved designing a facet heterojunction (FH) structure for rutile TiO2 to facilitate charge separation. First-principles calculations were used to verify the FH mechanism, and experimental methods included hydrothermal synthesis and coating processes to create the FH-TiO2 structure.
2：Sample Selection and Data Sources:
Samples included pure rutile TiO2 nanorods (NRs), anatase NRs, P25 powder, and the fabricated FH-TiO
3：Data were sourced from synthesized materials and computational models. List of Experimental Equipment and Materials:
Equipment included scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, photoluminescence (PL) and time-resolved PL (TRPL) setups, photoelectrochemical cells, and gas chromatography for H2 measurement. Materials included titanium precursors, FTO substrates, methanol, and Pt cocatalyst.
4：Experimental Procedures and Operational Workflow:
The procedure involved synthesizing TiO2 NRs on FTO substrates, coating with ultrathin TiO2 nanosheets via hydrothermal methods, characterizing morphology and structure with SEM, TEM, XRD, and Raman, measuring charge separation with PL and TRPL, and evaluating photocatalytic performance through photocurrent responses and H2 production rates under UV irradiation.
5：Data Analysis Methods:
Data were analyzed using biexponential decay fitting for TRPL, comparison of photocurrent densities and H2 production rates, and statistical evaluation of enhancements.
独家科研数据包，助您复现前沿成果，加速创新突破
获取完整内容-
FTO
Serves as the photoelectrode substrate for anchoring TiO2 nanorods.
-
SEM
Used for imaging the morphology of TiO2 samples.
-
TEM
Used for high-resolution imaging and selected area electron diffraction of TiO2 samples.
-
XRD
Used for phase structure analysis of TiO2 samples.
-
Raman spectroscopy
Used for phase evaluation of TiO2 samples.
-
PL
Used to measure photoluminescence for charge-carrier recombination analysis.
-
TRPL
Used for time-resolved photoluminescence measurements to determine electron-hole pair lifetimes.
-
Ag/AgCl electrode
Used as a reference electrode in photoelectrochemical measurements.
-
Pt electrode
Used as a counter electrode in photoelectrochemical measurements and as a cocatalyst for H2 production.
-
Gas chromatography
Used for measuring H2 production rates.
-
登录查看剩余8件设备及参数对照表
查看全部
