研究目的
To study the decomposition mechanisms of carbonate-based electrolytes in lithium-ion batteries using operando infrared spectroscopy, focusing on SEI formation and thermal degradation.
研究成果
Operando IR spectroscopy revealed that EC reduction during SEI formation preserves the ring structure, contradicting some existing theories. Thermal decomposition at elevated temperatures is homogeneous and catalyzed by LiPF6 decomposition products, not dependent on electrode material. This provides new insights into electrolyte stability mechanisms, with implications for improving battery safety and performance.
研究不足
The ATR technique may have insufficient penetration depth to detect thin SEI layers or dense insoluble products. The small cell size and electrolyte volume could affect scalability to commercial batteries. Impurities from fabrication might influence results, and ex situ comparisons are challenging due to washing steps.
1:Experimental Design and Method Selection:
The study used a modified spectro-electrochemical cell for operando attenuated total reflection Fourier transform infrared (ATR FTIR) spectroscopy to monitor electrolyte changes during battery operation and heating. This allows real-time measurement of chemical changes in the electrolyte.
2:Sample Selection and Data Sources:
Lithium-ion coin cells were assembled with LiCoO2 (LCO) cathodes, graphite anodes, and lithium metal reference electrodes. The electrolyte was 1 M LiPF6 in a 50/50 vol./vol. mixture of ethylene carbonate (EC) and diethyl carbonate (DEC).
3:List of Experimental Equipment and Materials:
Equipment includes a Nicolet iS50 FTIR spectrometer with a DTGS detector, ATR diamond crystal, heating element, and thermocouple. Materials include LiCoO2, graphite powder, carbon black, PVDF binder, NMP solvent, Celgard separator, and LiPF6/EC/DEC electrolyte.
4:Experimental Procedures and Operational Workflow:
Cells were assembled in an argon-filled glove box. IR spectra were collected during electrochemical cycling (at C/6 rate) and heating tests (up to 70°C). Temperature was monitored using IR thermometry based on absorbance ratios. Data were collected with 4 cm?1 resolution and 32 scan averages.
5:Data Analysis Methods:
Spectral changes were analyzed to identify decomposition products and mechanisms. Kinetic analysis included plotting decay of IR bands over time, and temperature correlations were linear fits from calibration data.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容-
FTIR Spectrometer
Nicolet iS50
Thermo Fisher Scientific
Used for collecting infrared spectra to monitor chemical changes in the electrolyte during operando measurements.
-
PVDF Binder
Pellets
Sigma-Aldrich
Binder material for electrode slurries.
-
LiPF6/EC/DEC Electrolyte
1 M solution
Sigma-Aldrich
Electrolyte for lithium-ion cells, studied for decomposition.
-
ATR Diamond Crystal
Part of the spectro-electrochemical cell for attenuated total reflection measurements, allowing IR beam interaction with the electrolyte.
-
Heating Element
Used to heat the coin cells during thermal decomposition tests to elevated temperatures.
-
Thermocouple
Used for temperature measurement in calibration tests, though not feasible for operando electrolyte temperature measurement directly.
-
LiCoO2 Cathode Material
Alfa Aesar
Active material for the cathode in lithium-ion cells.
-
Graphite Powder
Alfa Aesar
Active material for the anode in lithium-ion cells.
-
Carbon Black
Acetylene
Alfa Aesar
Conductive additive in electrode slurries.
-
NMP Solvent
Sigma-Aldrich
Solvent for dissolving PVDF and preparing electrode slurries.
-
Celgard Separator
Separator film to prevent electrical shorts between electrodes.
-
Lithium Ribbon
Sigma-Aldrich
Used for half-cell reference electrodes.
-
登录查看剩余10件设备及参数对照表
查看全部