- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Generation of dark solitons in erbium-doped fiber laser based on black phosphorus nanoparticles
摘要： We demonstrate the generation of dark solitons (DSs) in erbium-doped fiber (EDF) laser based on black phosphorus nanoparticles (BPNPs) for the first time. The side-polished fiber deposited with BPNPs is embedded into the laser to enhance the birefringence and nonlinearity of the laser cavity. In the paper, the saturable absorption property of BPNPs with an optical modulation depth of 5.7% and a saturable intensity of 21.7 MW/cm2 are experimentally illustrated. After inserting the BPNPs saturable absorber (SA) into EDF laser, the DSs with repetition rate of 14.68 MHz are obtained at a pump power of 90 mW. Our results prove that the BPNPs are the promising candidate materials for generating DSs in EDF laser.
关键词： Side-polished fiber,Dark solitons,Black phosphorus nanoparticles
更新于2025-11-28 14:24:03
-
Mode-locking in Er-doped fiber laser with reduced graphene oxide on a side-polished fiber as saturable absorber
摘要： In this work, the generation of highly stable mode-locked pulses from a side-polished fiber (SPF) embedded with graphene oxide (rGO) nanoparticles (NPs) is proposed and demonstrated. The rGO NPs are obtained from a graphene oxide solution prepared using Hummer’s technique, before being reduced by a hydrothermal route. The rGO NPs, suspended in the form of a solution, are then drop-casted onto the SPF. The SPF is fabricated by polishing away the cladding layer of a single-mode fiber section, leaving the core exposed and allowing the evanescent field of the signal propagating through the fiber to interact directly with the NPs. The SPF is integrated into an erbium doped fiber laser (EDFL) cavity, and the strong nonlinear optical response and spectral filtering by the rGO NPs as well as total anomalous dispersion of the laser cavity generates highly stable soliton mode-locked pulses with visible Kelly’s sidebands at 1544.02 nm. The output pulses have a pulse repetition rate of 16.79 MHz and pulse duration of 1.17 ps throughout the mode-locking operation range of 64.44–280.5 mW. The rGO NP coated SPF in this work demonstrates the viability and performance of the SPF for mode-locked pulse generation via evanescent field interactions.
关键词： Side polished fiber,Reduced graphene oxide,Mode-locked fiber laser,Saturable absorber
更新于2025-11-28 14:23:57
-
Investigation of Surface Plasmon Resonance (SPR) in MoS2- and WS2-Protected Titanium Side-Polished Optical Fiber as a Humidity Sensor
摘要： In this paper, we report the effects of a side-polished fiber (SPF) coated with titanium (Ti) films in different thicknesses, namely 5 nm, 13 nm, and 36 nm, protected by a thin layer of transition metal dichalcogenides (TMDCs) such as molybdenum disulfide (MoS2) and tungsten disulfide (WS2), which provide ultra-sensitive sensor-based surface plasmon resonance (SPR) covering from the visible to mid-infrared region. The SPF deposited with Ti exhibits strong evanescent field interaction with the MoS2 and WS2, and good optical absorption, hence resulting in high-sensitivity performance. Incremental increases in the thickness of the Ti layer contribute to the enhancement of the intensity of transmission with redshift and broad spectra. The findings show that the optimum thickness of Ti with 36 nm combined with MoS2 causes weak redshifts of the longitudinal localized surface plasmon resonance (LSPR) mode, while the same thickness of Ti with WS2 causes large blueshifts. The redshifts are possibly due to a reduced plasmon-coupling effect with the excitonic region of MoS2. The observed blueshifts of the LSPR peak position are possibly due to surface modification between WS2 and Ti. Changing the relative humidity from 58% to 88% only elicited a response in Ti/MoS2. Thus, MoS2 shows more sensitivity on 36-nm thickness of Ti compared with WS2. Therefore, the proposed fiber-optic sensor with integration of 2D materials is capable of measuring humidity in any environment.
关键词： tungsten disulfide (WS2),side-polished fiber (SPF),molybdenum disulfide (MoS2)
更新于2025-11-28 14:23:57
-
All-optical graphene-oxide humidity sensor based on a side-polished symmetrical twin-core fiber Michelson interferometer
摘要： A high-sensitive graphene-oxide (GO) humidity sensor based on a side-polished twin-core fiber (SPTCF) Michelson interferometer (MI) has been demonstrated. The MI was fabricated by splicing a section of TCF to a standard single mode fiber (SMF) and tapering the splicing point. The exposed polished core has a stronger evanescent field and enhances the interaction between light and external environment. The GO-SPTCFMI can operate in the wavelength- and intensity- modulated sensor. The super-high humidity sensitivities of ~2.72 nm/RH% in the RH range of 40-75% and ~3.76 dB/RH% in the RH range of 60-62.1% are obtained experimentally. The high-performance GO-SPTCFMI is a promising candidate for potential applications, such as gas sensing and biochemical detection.
关键词： side-polished fiber,graphene oxide,Humidity sensor,twin core fiber,interferometer.
更新于2025-09-23 15:23:52
-
[IEEE 2019 18th International Conference on Optical Communications and Networks (ICOCN) - Huangshan, China (2019.8.5-2019.8.8)] 2019 18th International Conference on Optical Communications and Networks (ICOCN) - Design and simulation of etched physical structure fiber Bragg grating for fabricating high temperature sensors
摘要： Side-polishing single-mode fiber (SP-SMF) to the D-fiber and etch the physical structure Grating into the polishing flat surface. The simulation results of SP-SMF by COMSOL software show that the electric field contour lines at the air-cladding interface is continuous when the fiber cladding is polished to closer the core. Using Rsoft software to simulate the side-polished and etched fiber Bragg grating（SP-EFBG） and obtained the structural parameters of SP-EFBG, when the grating period and grating length and grating depth of the simulated SP-EFBG are 775nm and 10000μm and 150nm respectively, obtain the central wavelength and bandwidth and peak reflectivity is 1550nm and 0.2044nm and 90.79% respectively.
关键词： Rsoft Simulation,Side-polished fiber Bragg grating,High-temperature,COMSOL Simulation,Etched fiber Bragg grating
更新于2025-09-16 10:30:52
-
[IEEE 2018 10th International Conference on Advanced Infocomm Technology (ICAIT) - Stockholm, Sweden (2018.8.12-2018.8.15)] 2018 10th International Conference on Advanced Infocomm Technology (ICAIT) - Mode-locked Fiber Laser Based on ZnO Nanoparticles as a Saturable Absorber
摘要： A mode-locked fiber laser based on ZnO nanoparticles as a saturable absorber is developed. ZnO nanoparticles deposited on a side-polished fiber function as a proper saturable absorber in the near infrared range. Mode-locking of pulses is verified through the Fourier transform analysis which characterizes the longitudinal modes of ring cavity. Stable optical pulses of less than 1-ns (resolution-limited) pulse-width are generated at 1064 nm.
关键词： ZnO nanoparticles,pulsed laser,side-polished fiber,saturable absorber,mode-locked
更新于2025-09-11 14:15:04