摘要： Laser powder bed fusion (LPBF) processes continue to grow in popularity and much progress has been made in recent years. However, due to the extreme thermal gradients present, significant residual stresses are inevitable and can be detrimental during component service. Critical to mitigating these stresses effectively is the ability to model the thermo-mechanical process accurately and efficiently. A simplified FE modelling methodology has been developed and applied to a cylindrical component built in both the horizontal and vertical orientations. The resulting distortion of the parts following a slitting process was compared with those predicted by the model and good agreement to within 5% was found. The final stress fields in the components were predicted by the model and then examined to assess the principal stresses driving the distortion and the causes of difference in results between the two build orientations.