研究目的
To design and fabricate a tunable photonic device incorporating a phase-change material (GST) in a photonic crystal structure for controlling guided-mode resonance (GMR) modes around 1550 nm.
研究成果
The GST-PC device successfully demonstrated tunable resonant modes in the 1.55 μm band by switching the GST between crystalline and amorphous states. The device showed good repeatability and potential applications in integrated photonic circuits and optical communications.
研究不足
The resonance linewidth significantly increased when the GST film was in its crystalline phase due to high material loss. Future work could explore materials with lower loss in both crystalline and amorphous states.
1:Experimental Design and Method Selection:
The device was designed using rigorous coupled wave analysis (RCWA) to optimize the GST-PC structure for significant tuning of the GMR mode. The methodology included numerical simulations to predict the optical characteristics based on material properties and device dimensions.
2:Sample Selection and Data Sources:
The device consisted of a stack of thin films on a one-dimensional surface relief grating, including a gold cladding layer, a zinc sulfide (ZnS) waveguide layer, and a GST thin film embedded within the ZnS layer.
3:List of Experimental Equipment and Materials:
Equipment included an e-beam evaporator for Au and ZnS layers, a sputter coater for the GST film, and a Q-switched Nd:YAG laser for phase transition. Materials included Ge2Sb2Te5 (GST), ZnS, and Au.
4:Experimental Procedures and Operational Workflow:
The GST-PC device was fabricated using a spin-on-glass and nanoimprint process. Phase transitions were induced by heating with a thermoelectric cooler and by laser scanning for amorphization.
5:Data Analysis Methods:
Reflection spectra were measured using a near-infrared spectrometer, and resonant wavelengths were determined by fitting data points near the minimal transmittance point.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容-
Q-switched Nd:YAG laser
Oppolette 3043
OPOTEK Inc.
To initiate the crystalline to amorphous transition for the c-GST film
-
Thermoelectric cooler
TG12-4L
Marlow
To heat the GST-PC for inducing crystallization
暂无现货
预约到货通知
-
Near infrared spectrometer
StellarNet Inc.
To analyze the reflected light
暂无现货
预约到货通知
-
E-beam evaporator
BJD-1800
Temescal
For depositing Au and ZnS layers
暂无现货
预约到货通知
-
Sputter coater
ATC 1800-F
AJA International
For depositing the GST film
暂无现货
预约到货通知
-
登录查看剩余3件设备及参数对照表
查看全部