研究目的
Investigating the use of cyclopentanamine hydrobromide (CyPA·HBr) to construct mixed 2D/3D perovskite for improved stability in light-emitting diodes (PeLEDs).
研究成果
The introduction of CyPA·HBr in mixed 2D/3D perovskites enables fine phase control and efficient defect passivation, leading to improved stability and performance of PeLEDs. The optimized devices exhibit pure green emission, high EQE, and brightness, with a longer half-lifetime compared to PEA·HBr-based devices. The study highlights the importance of ligand selection in modulating perovskite phase and passivating defects for better PeLED stability.
研究不足
The study focuses on the use of CyPA·HBr for phase control and defect passivation in mixed 2D/3D perovskites. The performance and stability of PeLEDs are compared with those using PEA·HBr, but other ligands and their effects are not explored. The study is limited to green-emitting PeLEDs, and the applicability to other colors is not investigated.
1：Experimental Design and Method Selection:
The study involves the synthesis of CyPA·HBr and its use in constructing mixed 2D/3D perovskite films by partial substitution of FA with CyPA. The methodology includes UV-Vis absorption, XRD, XPS, SEM, AFM, GIWAXS, steady-state and time-resolved photoluminescence, and SCLC measurements to characterize the films and devices.
2：Sample Selection and Data Sources:
Perovskite thin films were fabricated with different molar ratios of CyPA·HBr. The films were characterized using various spectroscopic and microscopic techniques.
3：List of Experimental Equipment and Materials:
Equipment includes Agilent 8453 spectrophotometer, Edinburgh fluorescence spectrometer (FLS920), smart lab instruments for XRD, FE-SEM (JEOL JSM-7401F), AFM (MFP-3D-SA System), XPS (ESCALAB 250Xi), and UPS. Materials include ITO conducting glass, PbBr2, HBr, DMF, PEA, CyPA, LiF, PEDOT:PSS, TFB, TPBi, and FABr.
4：Experimental Procedures and Operational Workflow:
The process involves the synthesis of CyPA·HBr, fabrication of perovskite thin films, and device fabrication. The films were spin-coated and treated with toluene to accelerate nucleation and growth. Devices were fabricated in a nitrogen-filled glovebox and characterized under ambient conditions.
5：Data Analysis Methods:
Data analysis involved measuring UV-Vis absorption, XRD patterns, XPS spectra, SEM and AFM images, photoluminescence spectra, and SCLC to determine defect density.
独家科研数据包，助您复现前沿成果，加速创新突破
获取完整内容-
ITO conducting glass
< 15 Ω per square
Fangsheng Photoelectric Technology Co., Ltd
Used as a substrate for the fabrication of perovskite light-emitting diodes.
-
Lead(II) bromide
Alfa Aesar
Used as a precursor in the synthesis of perovskite materials.
-
Hydrobromic acid
Alfa Aesar
Used in the synthesis of CyPA·HBr.
-
N,N-dimethylformamide
J&K chemical Corporation
Used as a solvent in the preparation of perovskite precursor solutions.
-
Phenethylamine
TCI
Used in the synthesis of PEA·HBr for comparison studies.
-
Cyclopentanamine
TCI
Used in the synthesis of CyPA·HBr.
-
Lithium fluoride
Xi’an Polymer Light Technology Corp
Used as an electron injection layer in the device fabrication.
-
Poly(ethylenedioxythiophene):polystyrenesulfonate
Used as a hole transport layer in the device fabrication.
-
Poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-(4,4′-(N-(4-butylphenyl)
Used as a hole transport layer in the device fabrication.
-
1,3,5-Tris(1-phenyl-1H-benzimidazol-2-yl)benzene
Used as an electron transport layer in the device fabrication.
-
Formamidinium bromide
Xi’an Polymer Light Technology Corp
Used as a precursor in the synthesis of perovskite materials.
-
登录查看剩余9件设备及参数对照表
查看全部
