研究目的
Investigating the ferroelectric and piezoelectric properties of Fe-doped potassium tantalum niobate (KTN) single crystals with different doping amounts, focusing on the evolution of defect dipoles and their impact on domain reorientation and material properties.
研究成果
The research demonstrates that Fe doping in KTN crystals affects defect dipole evolution, with higher doping reducing the recovery effect and adjustability of ferroelectric and piezoelectric properties due to a transformation from polar to nonpolar defect dipoles. This highlights the importance of doping amount in controlling material properties through defect engineering, but further investigation into the exact formation mechanisms is needed.
研究不足
The study is limited to Fe-doped KTN crystals with specific doping amounts (0.15% and 1%), and the definite mechanism of defect dipole formation is not fully understood, requiring further research. The findings may not generalize to other material systems or doping types.
1：Experimental Design and Method Selection:
The study investigates the influence of Fe doping on KTN crystals using hysteresis loops, current density curves, and domain observations to analyze defect dipole behavior and its effects on ferroelectric properties.
2：Sample Selection and Data Sources:
Fe-KTN crystals with
3：15% and 1% Fe doping were grown via the top-seeded solution growth method, cut into specific dimensions, and analyzed for composition using electron microprobe analysis. List of Experimental Equipment and Materials:
Equipment includes an inductance-capacitance-resistance meter (E4980A, Agilent Technologies), powder X-ray diffractometer (XRD-6000, Shimadzu), Precision Premier II test system (Radiant Technology, Inc.), pizeo-d33 meter (Zj-3A, Institute of Acoustics, Academic Sinica), and polarizing light microscopy (Zessi Axiokop 40). Materials include K2CO3 (
4：0). Materials include K2CO3 (99%), Fe2O3 (99%), Ta2O5 (99%), and Nb2O5 (99%) powders. Experimental Procedures and Operational Workflow:
99.99%), Fe2O3 (99.99%), Ta2O5 (99.99%), and Nb2O5 (99.99%) powders. 4. Experimental Procedures and Operational Workflow: Crystals were grown, cut, coated with electrodes, and subjected to dielectric measurements, XRD, P-E loop tests at 10 Hz, d33 measurements, and domain structure observations. Samples were annealed and aged before tests, and poling was done with a DC field.
5：Data Analysis Methods:
Data from hysteresis loops, current density curves, and microscopy images were analyzed to assess domain reorientation, internal bias fields, and piezoelectric properties, with comparisons between different doping levels.
独家科研数据包，助您复现前沿成果，加速创新突破
获取完整内容-
inductance-capacitance-resistance meter
E4980A
Agilent Technologies
Measuring the temperature dependence of dielectric properties at different frequencies.
E4980A/E4980AL Precision LCR Meter
立即获取同款设备 -
powder X-ray diffractometer
XRD-6000
Shimadzu
Performing room-temperature powder X-ray diffraction in reflection mode with Cu-Kα radiation.
暂无现货
预约到货通知
-
Precision Premier II test system
Precision Premier II
Radiant Technology, Inc.
Measuring polarization-electric field loops (P-E) at 10 Hz.
暂无现货
预约到货通知
-
polarizing light microscopy
Zessi Axiokop 40
Zessi
Observing domain structures of the crystals.
暂无现货
预约到货通知
-
electron microprobe analyzer
EPMA-1720
Shimadzu
Determining the composition of the Fe-KTN crystals.
暂无现货
预约到货通知
-
pizeo-d33 meter
Zj-3A
Institute of Acoustics, Academic Sinica
Determining the d33 piezoelectric coefficient.
暂无现货
预约到货通知
-
登录查看剩余4件设备及参数对照表
查看全部
