- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Sol-gel processed vanadium oxide as efficient hole injection layer in visible and ultraviolet organic light-emitting diodes
摘要： Low-cost, high-throughput and scalable production currently boosts organic electronic device towards solution processing. Sol-gel processed aqueous vanadium oxide (h-VOx) is facilely synthesized and proven to be efficient hole injection layer (HIL) in visible and ultraviolet organic light-emitting diodes (OLEDs). Atomic force microscopy and X-ray/ultraviolet photoelectron spectroscopy measurements indicate that h-VOx behaves superior film morphology and exceptional electronic properties such as oxygen vacancy dominated non-stoichiometry and appropriate surface work function. With tris(8-hydroxy-quinolinato)aluminium as emitter, the visible OLED gives maximum luminous and power efficiencies of 6.3 cd/A and 3.2 lm/W, respectively, which are slightly superior to the counterpart with vacuum thermally-evaporated VOx (5.6 cd/A and 2.7 lm/W). With 3-(4-biphenyl)-4-phenyl-5-tert-butylphenyl-1,2,4-triazole as emitter, the ultraviolet OLED produces attractive short-wavelength emission of 379 nm with full width at half maximum of 40 nm and improved durability. The maximum radiance and external quantum efficiency reach 15.3 mW/cm2 and 2.92%, respectively, which are considerably enhanced in comparison with the corresponding reference (11.9 mW/cm2 and 2.32%). Current versus voltage characteristics and impedance spectroscopy analysis elucidate that h-VOx exhibits robust hole injection and accordingly high-performance OLEDs. Our results pave an alternative way for advancing organic electronic devices and VOx applications with solution process.
关键词： Organic light-emitting diode,Hole injection,Solution process,Vanadium oxide,Sol-gel method
更新于2025-11-20 15:33:11
-
Broad-band emission and color tuning of Eu3+-doped LiCa2SrMgV3O12 phosphors for warm white light-emitting diodes
摘要： In this study, series of Eu3+-doped LiCa2SrMgV3O12 (LCSMV) phosphors with broad-band emission and color tunable feature were prepared via solid phase reaction. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) results presented a pure cubic phase product with micron-sized and homogeneous distribution of element. Their spectroscopic properties were investigated systematically by photoluminescence excitation (PLE) and emission (PL) spectra, temperature-dependent PL spectra and luminescence decay curves. The LCSMV phosphors displayed a strong absorption to ultraviolet light and a broad cyan emission. Moreover, in Eu3+-doped LCSMV phosphors, Eu3+ ion characteristic emissions at 589, 610, 651 and 705 nm, attributing to the 5D0→7F1, 7F2, 7F3 and 7F4 transitions, were observed. Along with Eu3+ ion concentrations increasing, the emission colors could be readily tuned from cyan to orange and the decay lifetimes of (VO4)3- became shorter. Meanwhile, electric dipole-dipole interaction was responsible to energy migration from (VO4)3- groups to Eu3+ ions. Further, the quantum efficiency (QE) values were estimated to be 32.5% for LCSMV host and 39.3% for LCSMV: 0.01Eu3+ sample. Finally, a LED lamp was prepared by integrating the blend of the LCSMV: 0.01Eu3+ phosphors and commercial blue-emitting BaMgAl10O17:Eu2+ phosphors with NUV chip (365 nm) and exhibited warm white light (CCT = 3655 K, Ra = 90), which may be applied in lighting and display field.
关键词： Self-activated luminescence,Color tunable,Light-emitting diode,Vanadate phosphor,Color rendering index,Broad-band emission
更新于2025-11-20 15:33:11
-
Effect of Excitation Wavelength on Optical Performances of Quantum-Dot-Converted Light-Emitting Diode
摘要： Light-emitting diode (LED) combined with quantum dots (QDs) is an important candidate for next-generation high-quality semiconductor devices. However, the effect of the excitation wavelength on their optical performance has not been fully explored. In this study, green and red QDs are applied to LEDs of different excitation wavelengths from 365 to 455 nm. The blue light is recommended for exciting QDs from the perspective of energy utilization. However, QD LEDs excited at 365 nm have unique advantages in eliminating the original peaks from the LED chip. Moreover, the green or red light excited by ultraviolet light has an advantage in colorimetry. Even for the 455 nm LED with the highest QD concentration at 7.0 wt%, the color quality could not compete with the 365 nm LED with the lowest QD concentration at 0.2 wt%. A 117.5% (NTSC1953) color gamut could be obtained by the 365 nm-excited RGB system, which is 32.6% higher than by the 455 nm-excited solution, and this can help expand the color gamut of LED devices. Consequently, this study provides an understanding of the properties of QD-converted LEDs under different wavelength excitations, and offers a general guide to selecting a pumping source for QDs.
关键词： excitation wavelength,colorimetry,quantum dots,light-emitting diode
更新于2025-11-19 16:46:39
-
Effect of UV wavelength on humic acid degradation and disinfection by-product formation during the UV/chlorine process
摘要： The efficiency of the ultraviolet (UV)/chlorine process strongly depends on UV wavelength because chlorine photolysis and its subsequent radical formation are highly wavelength-dependent. This study compared the degradation of humic acid (HA) during the UV/chlorine process by low pressure mercury lamp (LPUV, 254 nm) and ultraviolet light-emitting diode (UV-LED, 275 and 310 nm). The results indicated that HA degradation followed the pseudo-first-order kinetics, and the fluence-based degradation rate constants (kobs) were significantly affected by UV wavelength and solution pH. HA degradation decreased greatly with increasing solution pH during the UV/chlorine process at 254 nm, while the opposite trend was observed at 275 and 310 nm. In the meantime, kobs decreased in the order of 275 nm > 254 nm > 310 nm at pH > 7.0. The changes of chlorine molar absorption coefficients at different UV wavelengths resulted in the variation of chlorine photodecay rates (kobs, chlorine), and the synergistic effects of kobs, chlorine and chlorine quantum yields (Φchlorine) affected HA reduction. The formation of disinfection by-products (DBPs) during the UV/chlorine process was also evaluated. A significant suppression on DBP formation and DBP-associated calculated theoretical cytotoxicity were observed at 275 nm high UV fluence and alkaline pHs. These findings in this study demonstrate that UV wavelength at 275 nm is more suitable for HA degradation by the UV/chlorine advanced oxidation process in practical applications.
关键词： Disinfection by-products,Ultraviolet light-emitting diode (UV-LED),UV/chlorine,Humic acid,Toxicity,UV wavelength
更新于2025-11-19 16:46:39
-
Alcohol-Guided Growth of Two-Dimensional Narrow-Band Red-Emitting K2TiF6:Mn4+ for White Light-Emitting Diodes
摘要： The use of red phosphors with low light-scattering loss could improve the luminous efficacy and color rendering of white light-emitting diodes (LEDs). Thus, the discovery of such phosphors is highly desired. In this work, high-efficiency two-dimensional red-emitting K2TiF6:Mn4+ (KTFM) were synthesized via an alcohol-assisted coprecipitation route. The synergistic effects of 1-propanol and hydrofluoric acid (HF) on the growth of KTFM microsheets (MSs) were studied through the first-principles calculations, which revealed that 1-propanol promoted the growth of KTFM MSs by preferentially adsorbing on the H-terminated K2TiF6 (001) surface. The photoluminescence quantum efficiency (QE) of Mn4+-activated K2TiF6 MSs was highly related to their size and thickness. The morphology-optimal KTFM MSs presented high internal QE (> 90 %), external QE (> 71%), and thermal quenching temperature (102% at 150 °C relative to that at 25 °C). A prototype phosphor-converted LED with KTFM as the red-emitting component showed an excellent color rendition (Ra = 91, R9 = 79) and high luminous efficacy (LE =156 lm/w).
关键词： light emitting diode,two-dimensional material,Narrow band,K2TiF6:Mn4+,backlight,red emission
更新于2025-11-14 17:04:02
-
Eu and Dy doped borophosphosilicate glass-ceramics for near ultraviolet based light-emitting diode applications
摘要： The Eu and Dy doped borophosphosilicate glass-ceramics prepared using melt quenching technique are investigated for light-emitting diode applications. The X-ray diffraction results show that the precipitation of AlPO4 crystals in glass matrix occurred during the melt quenching process, leading to the formation of glass-ceramics. The content of AlPO4 crystals depends on the B2O3/P2O5 relative content in glass matrix composition. The spontaneous conversion of Eu3+ to Eu2+ takes place in the as-obtained glass-ceramics without using reducing atmosphere during the preparation process. The conversion extent of Eu3+ to Eu2+, optical properties and structure of the as-obtained materials are related to the B2O3/P2O5 relative content. The Eu/Dy co-doped borophosphosilicate glass-ceramics display the emission bands in the blue, yellow, and red light regions and their combinations generate near white light-emission. In addition, the tunable light emission can be realized by changing the concentration of Eu and B2O3/P2O5 relative content. The as-developed Eu and Dy doped borophosphosilicate glass-ceramics show promising prospects in light-emitting diode applications.
关键词： Rare earth,Luminescence,Light-emitting diode,Borophosphosilicate glass-ceramics
更新于2025-11-14 15:23:50
-
Study of visible-light photocatalytic degradation of 2,4-dichlorophenoxy acetic acid in batch and circulated-mode photoreactors
摘要： Purpose The consumption of pesticides and chemical fertilizers is one of the major environmental and health problems. In this report, 2,4-dichlorophenoxyacetic acid (2,4-D) was chosen to evaluate the impact of photodegradation using LED (Light-emitting diode) (400 and 365 nm) sources in batch and programmable circulated-mode photoreactors respectively. Methods A β-cyclodextrin (β-CD) grafted titanium dioxide P25 (P25/β-CD) and complexation of 2,4-D and β-CD were synthesized via photoinduced and spray-drying methods, respectively. The structures were characterized. Moreover, we investigated the effects of the amount of catalyst, the β-CD amount on bed catalyst, irradiation time, kind of photoreactor on the photocatalytic degradation efficiency. Results Based on the results of experiments in batch reactor, the optimum amount of TiO2, β-CD grafted by catalyst were 1 and 0.1 g/L, respectively. In batch-mode the photodegradation efficiency of 2,4-D after 5 h with P25, P25/β-CD as a photocatalyst and 2,4-D/β-CD complex with P25 photocatalyst were approximately 81, 85 and 95% respectively. After 8 h of irradiation in circulated-mode reactor, degradation yields with P25, P25/β-CD and 2,4-D/β-CD complex along with P25 were 89, 91 and 96% respectively. On the other hand, the circulated-mode photoreactor with high efficiency was appropriate to degradation of the high concentration of 2,4-D solution (200 mg/L). After 5 successive cycles with 25 h of irradiation, P25 and P25/β-CD maintained as high 2,4-D removal efficiency as 82.6, 84% respectively, with excellent stability and reusability. Conclusion The photodegradation method can be used as an effective and environmental friendly process in the degradation of organic compound.
关键词： 2,4-D/β-CD complex,Batch-mode photoreactor,Light-emitting diode (LED),Circulated-mode photoreactor,2,4-Dichlorophenoxyacetic acid (2,4-D)
更新于2025-11-14 15:18:02
-
Single crystal structure and electroluminescence efficiency of blue fluorescence OLED emitters using triple core chromophores
摘要： The relationship between the single crystal structure of materials and the EL performance of doped OLED devices was investigated. The 1,6-bis-(10-[1,1′;3′,1″]terphenyl-5′-yl-anthracen-9- yl)-pyrene (1,6 DAP-TP) has a dihedral angle (α) of 78.4 ° and a dihedral angle (β) of 81.2 °, a relatively more twisted single crystal structure compared to that of 6,12-bis-(10- [1,1′;3′,1″]terphenyl-5′-yl-anthracen-9-yl)-chrysene (DAC-TP). Such a highly twisted molecular structure can improve the electroluminescence (EL) efficiency of a material because it can inhibit rotational and vibrational motions. Also, since the doped state and single crystal structure imply, respectively, a diluted state and a molecular state, the EL efficiency of the doped OLED device is related to single crystal structure. In a 4% doped OLED device, 1,6 DAP-TP and DAC- TP showed CE of 2.10 cd A-1 and 0.93 cd A-1, respectively. With its relatively more twisted single crystal structure, 1,6 DAP-TP showed higher CE in a doped OLED device than DAC-TP. Both compounds had ultra-deep blue emission y values of 0.06 or less for the color coordinates, which satisfy high density television display requirements (y value less than 0.08).
关键词： Organic light-emitting diode,single crystal,fluorescence,dopant,blue
更新于2025-10-22 19:40:53
-
Enhancing Reverse Intersystem Crossing via Secondary Acceptors: towards Sky-Blue Fluorescent Diodes with Tenfold-Improved Exter-nal Quantum Efficiency
摘要： How to simply but effectively facilitate reverse intersystem crossing (RISC) transition is always the key issue for developing high-performance thermally activated delayed fluorescence (TADF) dyes. In this work, as a proof of concept, a feasible strategy named 'acceptor enhancement' is demonstrated with a series of ternary blue emitters (xCzmPOnTPTZ) using diphenylphosphine oxide (PO) as secondary acceptors. Compared with its PO-free binary analogue, such simple introduction of PO groups in pCzPO2TPTZ dramatically enhances its RISC rate constant (kRISC) by 10 times to the level of ~105 s-1, accompanied by RISC efficiency (ηRISC) of 92%, which further improves the triplet-to-singlet upconversion for effective triplet harvesting in its devices. As the result, on the basis of a trilayer device structure, pCzPO2TPTZ realized a state-of-the-art external quantum efficiency (EQE) beyond 20% with tenfold improvement.
关键词： Organic Light-Emitting Diode,Thermally Activated Delayed Fluorescence,Excited State Transition,Blue Emission,Reverse Intersystem Crossing,Phosphine Oxide Acceptor
更新于2025-09-23 15:23:52
-
Alternative Type 2D-3D Lead Halide Perovskite with Inorganic Sodium Ions as Spacer for High Performance Light Emitting Diodes
摘要： Two-dimensional (2D) lead halide perovskites with long-chain ammonium halides display high photoluminescence quantum yield (PLQY), due to their size and dielectric confinement, which promise a high efficiency and low-cost light emitting diode (LED). However, the presence of insulating organic long-chain spacer cation (L) dramatically deteriorates the charge transport properties along the out-of-plane nanoplatelet direction or adjacent nanocrystals, which would limit the LED device performance. In order to overcome this issue, we successfully incorporate small alkaline ions such as sodium (Na+) to replace long organic molecule. Grazing incident X-ray diffraction (GIXRD) measurements verify the 2D layered formation with preferential crystallite orientation. In addition, the incorporated sodium salt also generates amorphous sodium lead bromide (NaPbBr3) in perovskite as spacers to form nanocrystal-like halide perovskite film. PLQY is dramatically improved in the sodium incorporated film associating with enhanced PL lifetime. With incorporating small concentration of an organic additive, this 2D-3D perovskite can achieve a compact and uniform film. Therefore, a 2D-3D perovskite achieves a high external quantum efficiency (EQE) of 15.9% with good operational stability. Our work develops a type of 2D-3D halide perovskite with various inorganic ions as spacers for high performance of promising optoelectronic devices.
关键词： two-dimensional,alkaline halide,perovskite,dielectric confinement,light-emitting diode
更新于2025-09-23 15:23:52