- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Electrophoresis Assembly of Novel Superhydrophobic Molybdenum Trioxide (MoO3) Films with Great Stability
摘要： This work presents a hydrothermal synthesis approach to produce novel schistose molybdenum trioxide (MoO3) powders with wide application, and introduces a facile electrophoresis assembly technique to construct the superhydrophobic MoO3 films (SMFs) with contact angle up to 169 ± 1° at normal pressure and temperature. The microstructures and chemical compositions of product were analyzed by field emission scanning electron microcopy (FESEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD). The wettability and stability studies indicate that the SMFs all show great resistance in various environments with adjusting factors, including droplets with different surface tension, pH, relative humidity, etc., and the stability can be maintained at least for five months. Notably, this paper will provides a valuable reference for designing novel oxide powders and their high-efficient hydrophobic film formation with self-cleaning or water proof properties.
关键词： superhydrophobic stability,Hydrothermal synthesis,Electrophoretic deposition,Schistose molybdenum trioxide,high-efficient
更新于2025-09-19 17:15:36
-
Protein-functionalized WO3 nanorods–based impedimetric platform for sensitive and label-free detection of a cardiac biomarker
摘要： We report the development of a sensitive and a label-free electrochemical immunosensing platform for the detection of cardiac biomarker troponin I (cTnI) using tungsten trioxide nanorods (WO3 NRs). The low-temperature hydrothermal technique was employed for the controlled synthesis of WO3 NRs. Thin films of 3-aminopropyltriethoxy saline (APTES)-functionalized WO3 NRs were deposited on indium tin oxide (ITO)-coated glass substrate (0.5 cm × 1 cm) using electrophoretic deposition technique. The covalent immobilization of cTnI antibody onto functionalized WO3 NRs electrode was accomplished using EDC-NHS [1-(3-(dimethylamino)-propyl)-3-ethylcarbodiimide hydrochloride and N-hydroxysulfosuccinimide] chemistry. The structural and morphological characterizations of WO3 NRs and functionalized WO3 NRs were studied using X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, and electrochemical techniques. The impedimetric response study of the proposed immunosensor demonstrates high sensitivity [6.81 KΩ·mL/(ng·cm2)] in a linear detection range of 0.01–10 ng/mL. The excellent selectivity, good reproducibility, and long-term stability of the proposed immunosensing platform indicate WO3 NRs as a suitable platform for the development of a point-of-care biosensing device for cardiac detection.
关键词： electrochemical impedance spectroscopy,tungsten trioxide nanorods,immunosensor,cardiac biomarker,label-free detection
更新于2025-09-19 17:15:36
-
Effects of Milling Time, Zirconia Addition, and Storage Environment on the Radiopacity Performance of Mechanically Milled Bi2O3/ZrO2 Composite Powders
摘要： Mineral trioxide aggregate (MTA) typically consists of Portland cement (75 wt.%), bismuth oxide (20 wt.%), and gypsum (5 wt.%) and is commonly used as endodontic cement. Bismuth oxide serving as the radiopacifying material reveals the canal filling effect after clinical treatment. In the present study, bismuth/zirconium oxide composite powder was prepared by high energy ball milling of (Bi2O3)100?x (ZrO2)x (x = 5, 10, 15, and 20 wt.%) powder mixture and used as the radiopacifiers within MTA. The crystalline phases of the as-milled powders were examined by the X-ray diffraction technique. The radiopacities of MTA-like cements prepared by using as-milled composite powders (at various milling stages or different amount of zirconia addition) were examined. In addition, the stability of the as-milled powders stored in an ambient environment, an electronic dry box, or a glove box was investigated. The experimental results show that the as-milled powder exhibited the starting powder phases of Bi2O3 and ZrO2 and the newly formed δ-Bi7.38Zr0.62O2.31 phase. The longer the milling time or the larger the amount of the zirconia addition, the higher the percentage of the δ-Bi7.38Zr0.62O2.31 phase in the composite powder. All the MTA-like cements prepared by the as-milled powder exhibited a radiopacity higher than 4 mmAl that is better than the 3 mmAl ISO standard requirement. The 30 min as-milled (Bi2O3)95(ZrO2)5 composite powder exhibited a radiopacity of 5.82 ± 0.33 mmAl and degraded significantly in the ambient environment. However, storing under an oxygen- and humidity-controlled glove box can prolong a high radiopacity performance. The radiopacity was 5.76 ± 0.08 mmAl after 28 days in a glove box that was statistically the same as the original composite powder.
关键词： mineral trioxide aggregates,radiopacity,bismuth oxide,mechanical milling,zirconia
更新于2025-09-19 17:13:59
-
Near infrared radiation shielding using CsxWO3 Nanoparticles for infrared mini Light-Emitting Diodes
摘要： Recently, near infrared LEDs have been used in small electronic devices due to the trend of manufacturing compact systems. The intensity of near infrared (NIR) optical device needs to be moderated if the chip emits too much power. In tradition, color pigments are used as additives in the encapsulant of LEDs to reduce the intensity of over irradiated NIR, a strategy which results in unaesthetic appearance. Cesium doped tungsten trioxide (CsxWO3) nanoparticles (NPs) have good near infrared absorption ability. Applying very few amount of CsxWO3 NPs into the encapsulation materials of NIR optical device can decrease NIR intensity while still maintain high visible light transmittance without losing aesthetic touch of those devices such as LED transmitters. The addition of only 0.0021 wt% CsxWO3/PMA dispersion in epoxy encapsulant can drop 15.5% NIR (860 nm) intensity but barely reduce visible light (only 3.2% at 450 nm). The excellent performance of CsxWO3 NPs; i.e., good NIR absorption and visible light transmission properties, can be suitable for maintaining the moderate luminescence intensity of small optoelectronic devices like NIR mini- or micro- light-emitting diodes.
关键词： nanoparticles,Mini-LED,Near-infrared shielding,nanocomposites,Cesium doped tungsten trioxide
更新于2025-09-12 10:27:22
-
Hexagonal boron nitride quantum dots as a superior hole extractor for efficient charge separation in WO <sub/>3</sub> based photoelectrochemical water oxidation
摘要： Photoelectrochemical (PEC) water splitting is one of the best desirable technique to harvest clean chemical energy from abundant solar energy. However, the anodic half reaction, i.e. water oxidation is complicated due to the involvement of multiple electrons in this process. Herein, stable WO3 nanoblocks with monoclinic phase have been modified by incorporation of hexagonal boron nitride quantum dots (h-BNQDs) to improve the photogenerated electron-hole separation and additionally to hinder the charge recombination process. The photocurrent density (J) value for modified WO3 photoanode by incorporation of BNQDs has been found to be 1.63 mA/cm2 at the potential of 1.23VRHE which is approximately 2.4 fold higher than the bare WO3 photoanode. The enhancement in photocurrent density is mainly due to the hole extraction property of BNQDs on the surface of the WO3 nanoblocks. A two-fold increment in photogenerated charge carrier density (ND) value has been achieved due to better charge separation of electron-hole pairs in the modified system confirmed by the Mott-Schottky (MS) plot. Present work demonstrates a unique, low-cost strategy for enhancement of PEC water oxidation by modification of photoanode with hole extracting agents.
关键词： charge separation,boron nitride quantum dots,photoelectrochemical water oxidation,hole extracting agent,Tungsten trioxide
更新于2025-09-12 10:27:22
-
Mesoporous Tungsten Trioxide Photoanodes Modified with Nitrogen-Doped Carbon Quantum Dots for Enhanced Oxygen Evolution Photo-Reaction
摘要： Nanostructured photoanodes are attractive materials for hydrogen production via water photo-electrolysis process. This study focused on the incorporation of carbon quantum dots doped with nitrogen as a photosensitizer into mesoporous tungsten trioxide photoanodes (N-CQD/meso-WO3) using a surfactant self-assembly template approach. The crystal structure, composition, and morphology of pure and N-CQD- modi?ed mesoporous WO3 photoanodes were investigated using scanning electron and transmission microscopy, X-ray di?raction, and X-ray photoelectron spectroscopy. Due to their high surface area, enhanced optical absorption, and charge-carrier separation and transfer, the resulting N-CQD/meso-WO3 photoanodes exhibited a signi?cantly enhanced photocurrent density of 1.45 mA cm?2 at 1.23 V vs. RHE under AM 1.5 G illumination in 0.5 M Na2SO4 without any co-catalysts or sacri?cial reagent, which was about 2.23 times greater than its corresponding pure meso-WO3. Moreover, the oxygen evolution onset potential of the N-CQD/meso-WO3 photoanodes exhibited a negative shift of 95 mV, signifying that both the charge-carrier separation and transfer processes were promoted.
关键词： tungsten,dots,trioxide,photo-electrochemical,mesoporous,quantum,carbon,water splitting
更新于2025-09-11 14:15:04
-
Large tunability of strain in WO3 single-crystal microresonators controlled by exposure to H2 gas
摘要： Strain engineering is one of the most effective approaches to manipulate the physical state of materials, control their electronic properties, and enable crucial functionalities. Because of their rich phase diagrams arising from competing ground states, quantum materials are an ideal playground for on-demand material control, and can be used to develop emergent technologies, such as adaptive electronics or neuromorphic computing. It was recently suggested that complex oxides could bring unprecedented functionalities to the field of nanomechanics, but the possibility of precisely controlling the stress state of materials is so far lacking. Here we demonstrate the wide and reversible manipulation of the stress state of single-crystal WO3 by strain engineering controlled by catalytic hydrogenation. Progressive incorporation of hydrogen in freestanding ultra-thin structures determines large variations of their mechanical resonance frequencies and induces static deformation. Our results demonstrate hydrogen doping as a new paradigm to reversibly manipulate the mechanical properties of nanodevices based on materials control.
关键词： Tungsten Trioxide,Hydrogen Doping,MicroElectroMechanical Systems,WO3,Transition Metal Oxides,Oxide MEMS,Strain Engineering,Chemical Strain
更新于2025-09-11 14:15:04
-
Lateral InSe p–n Junction Formed by Partial Doping for Use in Ultrathin Flexible Solar Cells
摘要： Two-dimensional InSe possesses good electrical conductivity, intrinsic and structural flexibility, high chemical stability, and a tunable band gap, enabling it to be a promising candidate for flexible and wearable solar cells. Here we construct a lateral p?n junction by partially doping molybdenum trioxide (MoO3) at the surface of the InSe monolayer. Our density functional theory calculations reveal that the strong hybridization between MoO3 and InSe induces a lateral built-in electric field in the partially doped substrate and promotes the effective separation of carriers. Under a large range of external stains, the doped InSe can maintain the direct band gap, and the lateral structure device exhibits power conversion efficiencies over 5% and high carrier mobility around 1000 cm2 V?1 s?1. In particular, a power conversion efficiency of 20.7% can be achieved with 10% compressive strain. The partially doped InSe monolayer is expected to be used as an ultrathin flexible solar cell.
关键词： lateral p?n junction,density functional theory,carrier mobility,flexible solar cells,power conversion efficiency,Two-dimensional InSe,molybdenum trioxide
更新于2025-09-11 14:15:04
-
Effects of sintering temperature on sensing properties of WO <sub/>3</sub> and Ag-WO <sub/>3</sub> electrode for NO <sub/>2</sub> sensor
摘要： Pure WO3 and Ag-WO3 (mixed solid solutions Ag with WO3) have been successfully synthesized by sol-gel method and the influences of calcination temperature on the particle size, morphology of the WO3 and Ag-WO3 nanoparticles were investigated. Powder X-ray diffraction results show that the hexagonal to monoclinic phase transition occurs at calcination temperature varying from 300°C to 500°C. SEM images show that calcination temperature plays an important role in controlling the particle size and morphology of the as-prepared WO3 and Ag-WO3 nanoparticles. The NO2 gas sensing properties of the sensors based on WO3 and Ag-WO3 nanoparticles calcined at different temperatures were investigated and the experimental results exhibit that the gas sensing properties of the Ag-WO3 sensors were superior to those of the pure WO3. Especially, the sensor based on Ag-WO3 calcined at 500°C possessed larger response, better selectivity, faster response/recovery and better longer-term stability to NO2 than the others at relatively low operating temperature (150°C).
关键词： tungsten trioxide,sintering temperature,low operating temperature,gas sensing properties
更新于2025-09-11 14:15:04
-
Ammonia Sensing Characteristics of a Tungsten Trioxide Thin-Film-Based Sensor
摘要： A tungsten trioxide (WO3) thin-film-based ammonia sensor device prepared using radio frequency sputtering is reported and studied. A very thin WO3 film (~10 nm) is employed in the studied device. Experimentally, the studied device exhibits a high ammonia sensing response of 13.7 (at 1000-ppm NH3/air, 250 °C), an extremely low detection level (≤10-ppb NH3/air, 250 °C), a relatively low optimal operating temperature of 250 °C, and a widespread sensing concentration range. Furthermore, the device shows advantages including a simple structure, easy fabrication, and relatively lower operating temperature (≤250 °C). Thus, the proposed WO3 thin-film-based sensor device is promising for high-performance ammonia sensing applications.
关键词： Ammonia,detection level,semiconducting metal oxide (SMO),sensing response,tungsten trioxide (WO3),sputtering
更新于2025-09-09 09:28:46