- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Vancomycin functionalized WO3 thin film-based impedance sensor for efficient capture and highly selective detection of Gram-positive bacteria
摘要： In this study, we report a facile, reusable, and highly sensitive label-free impedance sensor for discriminating Gram-positive and Gram-negative bacteria. The impedance sensor was fabricated using gold interdigitated electrodes onto a tungsten oxide thin film. X-Ray diffraction confirmed the formation of polycrystalline tungsten oxide. Field emission scanning electron microscopy and atomic force microscopy revealed that tungsten oxide has a porous structure. Tungsten oxide was functionalized with vancomycin, a glycopeptide antibiotic known to have a specific interaction with the peptidoglycan layer of Gram-positive bacteria. fourier transform infrared microscopy and scanning electron microscopy were employed to test the morphological coating of vancomycin on interdigitated electrodes/ tungsten oxide sensor. The functionalized tungsten oxide sensor was highly efficient in the capture of Gram-positive bacteria. The impedance measurement was also sensitive to differentiate between viable and non-viable Gram-positive bacteria. Limit of detection 102 colony forming unit/ml, linear dynamic range 102 - 107 colony forming unit/ml under physiological conditions and reusable nature of this vancomycin coated impedance sensor provide a label-free strategy for quick, sensitive and highly selective detection of Gram-positive bacteria.
关键词： Vancomycin,WO3 thin film,Gram-positive bacteria,Impedance sensor
更新于2025-11-21 11:18:25
-
LED visible-light driven label-free photoelectrochemical immunosensor based on WO3/Au/CdS photocatalyst for the sensitive detection of carcinoembryonic antigen
摘要： A ternary WO3/Au/CdS photocatalyst was prepared by reversible redox and ionic adsorption for the first time. The photocatalyst exhibited high photocatalytic activity and good photoelectrochemical (PEC) property in comparison with WO3, CdS, WO3/Au and WO3/CdS, because the localized surface plasmon resonance (LSPR) effect of Au nanoparticles (Au NPs) and the sensitization of CdS benefited the spatial separation of photogenerated electron-hole pairs and the absorption of visible light. Thus, its photocurrent response intensity was quite high, up to about 218-fold of WO3 and 87-fold of CdS under 430 nm LED light irradiation. Based on the large anodic photocurrent and the specific recognition between carcinoembryonic antigen (CEA) and anti-CEA, a novel PEC immunosensor was constructed for the sensitive and selective detection of CEA. Under the selected conditions, the change of photocurrent intensity was linear to the logarithm of CEA concentration over the range from 0.01 to 10 ng/mL, and the detection limit was down to 1 pg/mL. The immunosensor also showed good stability, reproducibility and repeatability. It was successfully applied to the detection of CEA in serum samples.
关键词： Au nanoparticles,WO3,Photoelectrochemical immunosensor,Carcinoembryonic antigen,CdS
更新于2025-11-21 11:01:37
-
Binary composites WO3/g-C3N4 in porous morphology: Facile construction, characterization, and reinforced visible light photocatalytic activity
摘要： Various WO3/g-C3N4 binary composites were constructed by a facile one-step calcination procedure and then systematically analyzed for chemophysical properties. Interestingly, these resultant composites showed porous morphology in combination with some tubular structures, where both components were closely contacted to generate heterojunction structures. Accordingly, these composites possessed reinforced visible-light absorption capability and enlarged specific surface areas in texture. These microstructural, morphological, and electronic merits ensured the strengthened photocatalytic performance toward degradation of rhodamine B (RhB) and methylene blue (MB) under visible light irradiation. In addition, on base of reactive species entrapping experiments and analytical results, a probable photocatalysis mechanism was speculated as a “Z-scheme” manner instead of conventional Type II path.
关键词： WO3,Photocatalytic degradation,Mechanism,Porous morphology,Binary composites,g-C3N4
更新于2025-11-14 17:04:02
-
Enhanced Methane Sensing Properties of WO3 Nanosheets with Dominant Exposed (200) Facet via Loading of SnO2 Nanoparticles
摘要： Methane detection is extremely difficult, especially at low temperatures, due to its high chemical stability. Here, WO3 nanosheets loaded with SnO2 nanoparticles with a particle size of about 2 nm were prepared by simple impregnation and subsequent calcination using SnO2 and WO3·H2O as precursors. The response of SnO2-loaded WO3 nanosheet composites to methane is about 1.4 times higher than that of pure WO3 at the low optimum operating temperature (90 °C). Satisfying repeatability and long-term stability are ensured. The dominant exposed (200) crystal plane of WO3 nanosheets has a good balance between easy oxygen chemisorption and high reactivity at the dangling bonds of W atoms, beneficial for gas-sensing properties. Moreover, the formation of a n–n type heterojunction at the SnO2-WO3 interface and additionally the increase of specific surface area and defect density via SnO2 loading enhance the response further. Therefore, the SnO2-WO3 composite is promising for the development of sensor devices to methane.
关键词： methane sensing,SnO2-loaded WO3 nanosheets,exposed (200) facet,heterojunction
更新于2025-11-14 17:03:37
-
Electrochromic Properties of Nanostructured WO <sub/>3</sub> Thin Films Deposited by Glancing‐Angle Magnetron Sputtering
摘要： Tungsten oxide thin films are prepared by glancing-angle reactive magnetron sputtering at room temperature. The surface and cross-section morphologies are characterized by FE-SEM and TEM. The electrochromic properties of the thin films are studied using a three-electrode system in 1 m LiClO4/PC solution. When the glancing angle is kept at 80°, a nanocolumnar structured film is obtained. This nanocolumnar structured film shows a lower driving potential and better stability compared to the dense film. The charge capacity per unit area of the nanocolumnar structured film is determined to be 30.85 mc cm?2. The diffusion rates of injection and detachment of ions are determined to be Din = 6.57 × 10?10 cm2 s?1 and Dde = 6.55 × 10?10 cm2 s?1 under an applied potential of ±1.2 V, respectively. The optical modulation amplitude of the nanocolumnar structured film reaches 65% at a wavelength of 600 nm and the optical density is superior to that of the dense film.
关键词： nanostructured,electrochromic,WO3 thin films,glancing angle,magnetron sputtering
更新于2025-11-14 17:03:37
-
Hierarchical Au-Loaded WO3 Hollow Microspheres with High Sensitive and Selective Properties to Toluene and Xylene
摘要： Functionalization of metal-oxide semiconductors by noble metal nanoparticles is one of the most efficient methods for enhancing the gas-sensing property of semiconducting sensors. Herein, we synthesized a series of Au-loaded hierarchical WO3 hollow microspheres (Au-WO3) via a facile modified solvothermal method combining with wet impregnation method. The structure, elemental composition and morphology of the synthesized materials were characterized by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and transmission electron microscopy (TEM). The results show that the materials are uniform and independent WO3 hollow microspheres, and Au nanoparticles are well distributed on the surface of WO3. The gas sensing properties of Au-WO3 materials were investigated and the results suggest that Au loading could greatly improve gas sensing performance of WO3 to aromatic compounds, especially toluene and xylene. Among the samples with different Au loading content, the one with 1.5 wt% Au (G3) exhibits the highest responses toward toluene and xylene at 340 °C. Moreover, the G3 sensor presents good responses, short response/recovery time, excellent selectivity, good reproducibility and long-term stability to toluene and xylene. Excellent gas sensing properties of Au-WO3 material make it a good candidate for detecting toluene and xylene.
关键词： toluene,Au-WO3,selectivity,xylene
更新于2025-11-14 17:03:37
-
Rationally Designed Fe2O3/GO/WO3 Z-Scheme Photocatalyst for Enhanced Solar light Photocatalytic Water Remediation
摘要： A novel ternary Fe2O3/GO/WO3 all-solid-state Z-Scheme photocatalyst was rationally designed. Structural, morphological, optical and electronic properties of the synthesized nanocomposite were investigated by XRD, SEM, TEM, UV-vis Diffuse Reflectance and Raman spectroscopy. The results revealed the successful synthesis of the nanocomposite materials. Uniquely, double absorption edges at 2.0 and 2.3 eV for Fe2O3/WO3 and triple absorption edges at 1.5, 1.8 and 2.1 eV for Fe2O3/GO/WO3 were investigated for the first time. Lower absorption band edges dominated for both Fe2O3/WO3 and Fe2O3/GO/WO3, while higher absorption edges dominated for pure nanomaterials. The enhanced interaction among GO, Fe2O3 and WO3 matrix explained the reduction in the CB energy leading to efficient electron separation and transformation and consequently improving the photocatalytic activity. The visible light photocatalytic performance of Fe2O3/GO/WO3 nanocomposites were evaluated for degradation of methylene blue (MB) and crystal violet (CV) dyes as model water pollutants. The photocatalytic activity for degradation of both dyes was found to be greatly enhanced in the presence of ternary Fe2O3/GO/WO3 nanocomposite as compared to nanocomposite systems of Fe2O3/WO3, WO3/GO and Fe2O3/GO or pure Fe2O3 and WO3 nanomaterials. The enhancement in the photocatalytic performance of ternary Fe2O3/GO/WO3 nanocomposite was proven to be due to the all-solid-state Z-Scheme in which the photogenerated electrons in the CB of photosystem I (WO3) transferred through GO mediator and recombined with the photogenerated holes in the VB of Fe2O3 (photosystem II). So that, the electron-hole pair recombination can be suppressed in both systems. Moreover, the photocatalytic activity of the best Fe2O3/GO/WO3 nanocomposite (FGW 30) has been tested for the degradation of phenol. The results show that 95.4 % of phenol was degraded in 120 minutes. Thus, this study provides an efficient green Z-Scheme photocatalyst for water remediation utilizing solar light.
关键词： solar light photocatalysis,organic dyes degradation,all-solid-state Z-Scheme,Ternary Fe2O3/GO/WO3,phenol mineralization
更新于2025-11-14 15:26:12
-
AIP Conference Proceedings [Author(s) 2ND INTERNATIONAL CONFERENCE ON CHEMISTRY, CHEMICAL PROCESS AND ENGINEERING (IC3PE) - Yogyakarta, Indonesia (14 August 2018)] - Enhanced photocatalytic activity of WO3 nanoparticles loaded with carbon
摘要： Enhanced photocatalytic activity of WO3 was attempted by carbon nanodots (C-dots) loading. C-dots were prepared using citric acid and urea for enhancing photocatalytic activity of WO3. Physicochemical character of C-dots was studied by fluorescence spectrophotometry and for the modified WO3, evaluation was studied by using x-ray diffraction (XRD) and scanning electron microscope (SEM). Effect of varied citric acid: urea ratio to photocatalytic activity was evaluated in methylene blue photodegradation. Increasing photocatalytic activity was achived by higher intensity in blue color range that obtained by higher urea molar ratio. Kinetics of reaction obey pseudo-first order and pseudo-second order reaction. Reaction reached 80% MB degradation for an hour treatment for 50mM of methylene blue solution.
关键词： photocatalytic activity,methylene blue photodegradation,WO3 nanoparticles,carbon nanodots
更新于2025-11-14 15:15:56
-
Facet effect on the photoelectrochemical performance of a WO3/BiVO4 heterojunction photoanode
摘要： Different WO3 facets have different surface energies and electronic structures, and exhibit different water oxidation abilities and photocatalytic performance as a result. Because of the material’s limited photoresponse region, loading a narrow bandgap material on WO3 is a generally known method for improving photo-harvesting. In this paper, we have synthesized WO3 films with different crystal facet ratios. After loading BiVO4 on these WO3 films, we measured the photoelectrochemical (PEC) performance to investigate the effects of WO3 facet choice on the heterojunction film electrode’s performance. We found that a high-intensity ratio of the (002) WO3 facet in X-ray diffraction (XRD) leads to a more negative onset potential and higher photocurrents in a lower potential region. The ultraviolet photoelectron spectra show a lower work function for the 002-dominant WO3 film compared to other WO3 films, which may result in a higher quasi-fermi level for the heterojunction electrode. Based on the XRD results, the high-intensity ratio of the (002) WO3 facet preferentially exposes the (020) BiVO4 facet, which may be a reason for the better charge extraction observed at low applied potential and high faradic efficiency on PEC water splitting. Together, this results in a high hole injection efficiency for 002-dominant WO3/BiVO4 films compared with WO3/BiVO4 films favoring other WO3 facet ratios.
关键词： BiVO4,WO3,Photoelectrochemical performance,Facet effect,Heterojunction
更新于2025-09-23 15:23:52
-
Hydrogen reduction characteristics of WO3 based on density functional theory
摘要： The ?rst principle theory in DFT (Density Function Theory) was applied to study the hydrogen adsorption on O-terminated and WO-terminated surface of WO3 (0 0 1). The exploration of the two terminated surfaces structure and hydrogen adsorption characteristics was conducted from the micro-structure point of view. The result indicates that energy of O-terminated surface with enriched oxygen is higher than the WO-terminated surface with less oxygen. The chemical adsorption occurs when the distance between hydrogen molecules and surface atom ranged from 0.6 ? to 0.8 ?, while the physical adsorption occurs when the distance was bigger than 0.8 ?. The energy of hydrogen adsorption on O-terminated surface is lower than energy of hydrogen adsorption on WO-terminated surface, the chemical adsorption of hydrogen is easier to happen compare to physical adsorption. The energy of hydrogen adsorption on O1c on O-terminated surface is lower than energy of hydrogen adsorption on O2c on the same surface. The adsorption of hydrogen not only changes the structure of surfaces of WO3 and cause the conducting electrons jumping into valence band and energy declining but also make a part of electrons in orbit 2p of O to jump into orbit 5p of W.
关键词： Hydrogen adsorption,First principle,Density of states,Reduction,WO3
更新于2025-09-23 15:23:52